Обсуждение: Hey, FC2 rpm is ready!
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, After very hard work of 5 months, with sleepless nights ( :-D ) I'm proud to announce the pgadmin3 1.2.0-post-beta1 rpm for Fedora Core 2 :-) It was funny that I couldn't build it since 5 months :) I found out my mistake (RTFM!). Anyway... the rpm is ready. I'll upload the FC2 rpm and SRPM to http://www.pgadmin.org/snapshots/linux/SRPMS/ http://www.pgadmin.org/snapshots/linux/FC2 in an hour. I'll automate this process again, as I did before, so everyday the new FC2 RPM for new snapshot will be uploaded to there. Next step: I'll build the rpm of wxWidgets for FC2... Regards, - -- Devrim GUNDUZ devrim~gunduz.org devrim.gunduz~linux.org.tr http://www.tdmsoft.com http://www.gunduz.org - ---------------------------------------------------------------------- gpg: Signature made Wed Sep 15 12:16:13 2004 EEST using DSA key ID 748F7D0E gpg: Good signature from "Devrim Gunduz <devrim@gunduz.org>" - ---------------------------------------------------------------------- -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQFBSApGtl86P3SPfQ4RAq2RAJwJQ4HaSKcafN0C9Ja3R+zfeRU7NACg2E8t 1Bx3TuXD2bc6WaEWEZ6/EUs= =9wSM -----END PGP SIGNATURE-----
> -----Original Message----- > From: Devrim GUNDUZ [mailto:devrim2@gunduz.org] > Sent: 15 September 2004 10:16 > To: pgadmin-hackers@PostgreSQL.org > Subject: Hey, FC2 rpm is ready! > Hi Devrim, > Hi, > > After very hard work of 5 months, with sleepless nights ( > :-D ) I'm proud to announce the pgadmin3 1.2.0-post-beta1 rpm > for Fedora Core 2 :-) Yay!! > It was funny that I couldn't build it since 5 months :) I > found out my mistake (RTFM!). Which was? > Anyway... the rpm is ready. I'll upload the FC2 rpm and SRPM to > > http://www.pgadmin.org/snapshots/linux/SRPMS/ > http://www.pgadmin.org/snapshots/linux/FC2 > > in an hour. Thanks - it might take longer than an hour to rsync up to www though... > I'll automate this process again, as I did before, so everyday the new > FC2 RPM for new snapshot will be uploaded to there. :-) > Next step: I'll build the rpm of wxWidgets for FC2... We're not holding binaries of wxWidgets any more - they were all hopelessly out of date anyway and all the developers were building from source. It would be good though it you could build a real beta1 just for completeness. Regards, Dave. PS, will this version run on FC1?
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, On Wed, 15 Sep 2004, Dave Page wrote: >> It was funny that I couldn't build it since 5 months :) I >> found out my mistake (RTFM!). > > Which was? I followed the instructions of Diego, cleaned up old wx and other stuff. also unix_compilation.html was my guide, too. >> Anyway... the rpm is ready. I'll upload the FC2 rpm and SRPM to >> >> http://www.pgadmin.org/snapshots/linux/SRPMS/ >> http://www.pgadmin.org/snapshots/linux/FC2 >> >> in an hour. > > Thanks - it might take longer than an hour to rsync up to www though... Umm, the package is 24 MB, I'm using 512K DSL at work so I'll be able to upload it after everyone goes home. Let's say 6 hours later. >> Next step: I'll build the rpm of wxWidgets for FC2... > > We're not holding binaries of wxWidgets any more - they were all > hopelessly out of date anyway and all the developers were building from > source. But... I think if we didn't compile pgadmin3 with --enable-static, then the package size would be smaller. People would install wxWidgets once; and then pgadmin3. So I believe we should build wxWidgets rpm. > It would be good though it you could build a real beta1 just for > completeness. Ok, done: pgadmin3-1.2.0-beta1.i686.rpm pgadmin3-1.2.0-beta1.src.rpm :) will upload these ones with the other ones tonite. > PS, will this version run on FC1? I have a FC1 box but it does not run a gui. I believe the SRPM will help people using FC1. Also... FC1 has been moved (or will be moved shortly) to fedora legacy project. I'm not sure that we'll need to support FC1. Regards, - -- Devrim GUNDUZ devrim~gunduz.org devrim.gunduz~linux.org.tr http://www.tdmsoft.com http://www.gunduz.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQFBSB7ytl86P3SPfQ4RArQRAKC+CZfl2ScA5Hgf++2h5yAXeTqcngCeJKqs +cPbCvECsixOv7TQBLYWvp0= =xsJB -----END PGP SIGNATURE-----
Devrim GUNDUZ wrote: > But... I think if we didn't compile pgadmin3 with --enable-static, then > the package size would be smaller. People would install wxWidgets once; > and then pgadmin3. So I believe we should build wxWidgets rpm. You're right, but a wx package we're relying on should be official. 2.5.3 will probably be useful for us, as soon as it's released. Regards, Andreas
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
On Wed, 15 Sep 2004, Andreas Pflug wrote:
>> But... I think if we didn't compile pgadmin3 with --enable-static, then the
>> package size would be smaller. People would install wxWidgets once; and
>> then pgadmin3. So I believe we should build wxWidgets rpm.
>
> You're right, but a wx package we're relying on should be official. 2.5.3
> will probably be useful for us, as soon as it's released.
O.K., got it.
Regards,
- --
Devrim GUNDUZ
devrim~gunduz.org devrim.gunduz~linux.org.tr
http://www.tdmsoft.com
http://www.gunduz.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQFBSCMctl86P3SPfQ4RAoFdAKCbFTueImR6SoY9k5rXMZoloN3yrwCgmD6n
ov+8PbAyp6fnJsabipxduEU=
=7/LB
-----END PGP SIGNATURE-----
> -----Original Message----- > From: Devrim GUNDUZ [mailto:devrim@gunduz.org] > Sent: 15 September 2004 11:53 > To: Dave Page > Cc: pgadmin-hackers@PostgreSQL.org > Subject: Re: [pgadmin-hackers] Hey, FC2 rpm is ready! > > Umm, the package is 24 MB, I'm using 512K DSL at work so I'll > be able to upload it after everyone goes home. Let's say 6 > hours later. OK. Don't forget, you upload to developer.pgadmin.org, but www.pgadmin.org is a completely different machine which rsyncs the snapshots from developer every few hours. Ftp is the same - that rsyncs up to developer.postgresql.org, and then to ftp.postgresql.org!! > >> Next step: I'll build the rpm of wxWidgets for FC2... > > > > We're not holding binaries of wxWidgets any more - they were all > > hopelessly out of date anyway and all the developers were building > > from source. > > But... I think if we didn't compile pgadmin3 with > --enable-static, then the package size would be smaller. > People would install wxWidgets once; and then pgadmin3. So I > believe we should build wxWidgets rpm. The problem is that we often update wxWidgets as well, so they end up downloading 2 large RPMs. We also then potentially run into all sorts of support problems because ppl don't necessarily realise this, or, they have vanilla versions of wx installed on their system anyway because it came with it and end up trying to compile against that. Bottom line is, it's easier and less troublesome to use a static build. > > It would be good though it you could build a real beta1 just for > > completeness. > > Ok, done: > > pgadmin3-1.2.0-beta1.i686.rpm > pgadmin3-1.2.0-beta1.src.rpm Thanks. > Also... FC1 has been moved (or will be moved shortly) to > fedora legacy project. I'm not sure that we'll need to support FC1. We still have RH9 users... Regards, Dave
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
On Wed, 15 Sep 2004, Dave Page wrote:
> OK. Don't forget, you upload to developer.pgadmin.org, but
> www.pgadmin.org is a completely different machine which rsyncs the
> snapshots from developer every few hours. Ftp is the same - that rsyncs
> up to developer.postgresql.org, and then to ftp.postgresql.org!!
I can directly upload to ftp.postgresql.org, if you want ;)
>> Also... FC1 has been moved (or will be moved shortly) to
>> fedora legacy project. I'm not sure that we'll need to support FC1.
>
> We still have RH9 users...
Ok :) I have RH9 at home. I'll do it.
- --
Devrim GUNDUZ
devrim~gunduz.org devrim.gunduz~linux.org.tr
http://www.tdmsoft.com
http://www.gunduz.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQFBSF6otl86P3SPfQ4RAmiVAJ9A/Rp1R2dA++pb0FOtL09839HSDgCfW9i+
2utnOyurOK94qnuAEsi1YO0=
=Nh+Q
-----END PGP SIGNATURE-----
> -----Original Message----- > From: Devrim GUNDUZ [mailto:devrim@gunduz.org] > Sent: 15 September 2004 16:24 > To: Dave Page > Cc: pgadmin-hackers@PostgreSQL.org > Subject: RE: [pgadmin-hackers] Hey, FC2 rpm is ready! > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Hi, > > On Wed, 15 Sep 2004, Dave Page wrote: > > > OK. Don't forget, you upload to developer.pgadmin.org, but > > www.pgadmin.org is a completely different machine which rsyncs the > > snapshots from developer every few hours. Ftp is the same - that > > rsyncs up to developer.postgresql.org, and then to > ftp.postgresql.org!! > > I can directly upload to ftp.postgresql.org, if you want ;) I'll bet you can't :-) > >> Also... FC1 has been moved (or will be moved shortly) to fedora > >> legacy project. I'm not sure that we'll need to support FC1. > > > > We still have RH9 users... > > Ok :) I have RH9 at home. I'll do it. Oh, that wasn't a hint - I was just pointing out that ppl don't all upgrade immediately. I still have a server running PG 7.3.something on Slackware 7.1 for example. That said, if you can do it that would be good - Jean-Michel used to do the RH9 build, but he's not around at the moment. Cheers, Dave.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
On Wed, 15 Sep 2004, Dave Page wrote:
>> I can directly upload to ftp.postgresql.org, if you want ;)
>
> I'll bet you can't :-)
Umm, ok ;)
>> Ok :) I have RH9 at home. I'll do it.
>
> Oh, that wasn't a hint - I was just pointing out that ppl don't all
> upgrade immediately. I still have a server running PG 7.3.something on
> Slackware 7.1 for example.
Ok, got it.
> That said, if you can do it that would be good - Jean-Michel used to do
> the RH9 build, but he's not around at the moment.
I'm using dial-up (with 28.8K modem) at home. I'll bring the sources with
a CD, and will bring the rpms back to work and upload them at work. It
will take 2 days , but I'll do.
Regards,
- --
Devrim GUNDUZ
devrim~gunduz.org devrim.gunduz~linux.org.tr
http://www.tdmsoft.com
http://www.gunduz.org
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.1 (GNU/Linux)
iD8DBQFBSLYbtl86P3SPfQ4RAlj2AKDmcvcfc0RhPG/DWWrEcNefB61WEgCfXCMB
mjStF3aRDeTarrc1gpadY/s=
=Vjgb
-----END PGP SIGNATURE-----
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, On Wed, 15 Sep 2004, Dave Page wrote: > Thanks :-) Think I owe you a beer or six!! Like this one? (I'm on the right :) ) (1.5 liters! :) ) http://www.gunduz.org/lkd/izmirbulusmasi/4.jpg :-) Regards, - -- Devrim GUNDUZ devrim~gunduz.org devrim.gunduz~linux.org.tr http://www.tdmsoft.com http://www.gunduz.org -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.2.1 (GNU/Linux) iD8DBQFBSLjNtl86P3SPfQ4RAsEXAKDd1/Cn0KR1q1AYM/pXlnqE/Zp/UgCeNpUe FOF+85MkSiJC1CJEWKplAWQ= =7Ych -----END PGP SIGNATURE-----
> -----Original Message----- > From: Devrim GUNDUZ [mailto:devrim@gunduz.org] > Sent: 15 September 2004 22:49 > To: Dave Page > Cc: pgadmin-hackers@PostgreSQL.org > Subject: RE: [pgadmin-hackers] Hey, FC2 rpm is ready! > > > Thanks :-) Think I owe you a beer or six!! > > Like this one? (I'm on the right :) ) (1.5 liters! :) ) > http://www.gunduz.org/lkd/izmirbulusmasi/4.jpg Wow, suddenly I'm very thirsty. Nice to 'meet' you btw! /D
Devrim GUNDUZ wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > > Hi, > > On Wed, 15 Sep 2004, Dave Page wrote: > >> Thanks :-) Think I owe you a beer or six!! > > > Like this one? (I'm on the right :) ) (1.5 liters! :) ) > http://www.gunduz.org/lkd/izmirbulusmasi/4.jpg Snap! Caught for my "pgAdmin Hall of Fame" :-) Regards, Andreas