Обсуждение: pgadminIII on OSX 10.3.9; w/ wxWidgets-2.6.0 OK, w/ wxWidgets-CVS make fail

Поиск
Список
Период
Сортировка

pgadminIII on OSX 10.3.9; w/ wxWidgets-2.6.0 OK, w/ wxWidgets-CVS make fail

От
OpenMacNews
Дата:
hi all,

coming back from vacation :-( i noticed that wxwidgets 2.6.0 has been released,
and that there are now nightly OSX builds available (nice! florian)

after updating to OSX 10.3.9, i've done a sanity run for myself:


wxWidgets-CVS (4/25/05 11:34:29) & wxWidgets-2.6.0 both:

    ../configure \
    --prefix=/usr/local/wxWidgets-cvs \
    --with-mac \
    --disable-shared \
    --disable-debug \
    --enable-unicode \
    --with-regex

    make
    make install

w/o error, where:

% du -s -h /usr/local/wxWidgets-260/*
    868K    /usr/local/wxWidgets-260/bin
    4.8M    /usr/local/wxWidgets-260/include
    16M     /usr/local/wxWidgets-260/lib
    12K     /usr/local/wxWidgets-260/share

% ls -al /usr/local/wxWidgets-260/bin
    total 868
    drwxr-xr-x  5 root    admin    170 Apr 25 15:18 .
    drwxr-xr-x  6 root    admin    204 Apr 25 15:18 ..
    lrwxr-xr-x  1 root    admin     69 Apr 25 15:18 wx-config ->
/usr/local/wxWidgets-260/lib/wx/config/mac-unicode-release-static-2.6
    lrwxr-xr-x  1 root    admin      8 Apr 25 15:18 wxrc -> wxrc-2.6
    -rwxr-xr-x  1 devuser wheel 879000 Apr 25 13:26 wxrc-2.6

% du -s -h /usr/local/wxWidgets-cvs/*
    968K    /usr/local/wxWidgets-cvs/bin
    4.8M    /usr/local/wxWidgets-cvs/include
    27M     /usr/local/wxWidgets-cvs/lib
    12K     /usr/local/wxWidgets-cvs/share

% ls -al /usr/local/wxWidgets-cvs/bin
    total 968
    drwxr-xr-x  5 root    admin    170 Apr 25 17:05 .
    drwxr-xr-x  6 root    admin    204 Apr 25 17:05 ..
    lrwxr-xr-x  1 root    admin     69 Apr 25 17:05 wx-config ->
/usr/local/wxWidgets-cvs/lib/wx/config/mac-unicode-release-static-2.6
    lrwxr-xr-x  1 root    admin      8 Apr 25 17:05 wxrc -> wxrc-2.6
    -rwxr-xr-x  1 devuser wheel 980160 Apr 25 17:00 wxrc-2.6

subsequent builds of pgadmin3-cvs (4/25/05 04:04:22) as:

CASE XXX == 260, cvs

    ./configure \
    --enable-appbundle \
    --enable-static \
    --disable-debug \
    --with-wx=/usr/local/wxWidgets-XXX \
    --with-wx-config=wx-config \
    --with-pgsql=/usr/local/pgsql \
    --with-pgsql-include=/usr/local/pgsql/include

    make all
    make install


--- (CASE wxwidgets-260) ------------------------------------------
no longer requires a chmod on complete-bundle.sh (thx!)

builds completely/successfully, but STILL fails to AUTOSTRIP correctly

% ls -al /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3
    -rwxr-xr-x  1 root admin 109540252 Apr 25 18:20
/usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3

% strip /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3

% ls -al /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3
    -rwxr-xr-x  1 root admin 7800208 Apr 25 18:24
/usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3

the resultant executable launches from Finder w/o error, and initial poking
around is error free.  yay!



--- (CASE wxwidgets-cvs) ------------------------------------------

no longer requires a chmod on complete-bundle.sh

configures OK

'make all' fails at:

    ld: Undefined symbols:
    wxAssert(int, wchar_t const*, int, wchar_t const*, wchar_t const*)
    make[2]: *** [pgadmin3] Error 1
    make[1]: *** [all-recursive] Error 1
    make: *** [all] Error 2

i'll see what i can find out abt this one ...

cheers,

richard


Re: pgadminIII on OSX 10.3.9; w/ wxWidgets-2.6.0

От
"Florian G. Pflug"
Дата:
OpenMacNews wrote:
> --- (CASE wxwidgets-260) ------------------------------------------
> no longer requires a chmod on complete-bundle.sh (thx!)
>
> builds completely/successfully, but STILL fails to AUTOSTRIP correctly
>
> % ls -al /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3
>     -rwxr-xr-x  1 root admin 109540252 Apr 25 18:20
> /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3
>
> % strip /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3
>
> % ls -al /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3
>     -rwxr-xr-x  1 root admin 7800208 Apr 25 18:24
> /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3
Hm.. this is strange... I works for the nightly builds...
In src/Makefile.am, you should find the lines:
         if test "$(pg_debug_build)" = "no"; then \
                 strip pgAdmin3 ;\
         fi

Could you put an "echo $(pg_debug_build)" before the if,
and post the output?

> the resultant executable launches from Finder w/o error, and initial
> poking around is error free.  yay!
good! ;-)

> --- (CASE wxwidgets-cvs) ------------------------------------------
>
> no longer requires a chmod on complete-bundle.sh
>
> configures OK
>
> 'make all' fails at:
>
>     ld: Undefined symbols:
>     wxAssert(int, wchar_t const*, int, wchar_t const*, wchar_t const*)
>     make[2]: *** [pgadmin3] Error 1
>     make[1]: *** [all-recursive] Error 1
>     make: *** [all] Error 2
>
> i'll see what i can find out abt this one ...
Hm... the nighty build currently link against wx-cvs (because
2.6 wasn't released when I set the build-daemon up), and
it links sucessfully....

Did you "make clean" your source-tree after switching wx version?

greetings, Florian Pflug

Вложения

Re: pgadminIII on OSX 10.3.9; w/ wxWidgets-2.6.0 OK,

От
OpenMacNews
Дата:
hi florian,

>> --- (CASE wxwidgets-260) ------------------------------------------
...
>> builds completely/successfully, but STILL fails to AUTOSTRIP correctly
...
> Hm.. this is strange... I works for the nightly builds...
> In src/Makefile.am, you should find the lines:
>          if test "$(pg_debug_build)" = "no"; then \
>                  strip pgAdmin3 ;\
>          fi
>
> Could you put an "echo $(pg_debug_build)" before the if,
> and post the output?

ok. per request,

    @216
            mv tmp pgAdmin3 ;\
    +++     echo $(pg_debug_build) ;\
            if test "$(pg_debug_build)" = "no"; then \
                strip pgAdmin3 ;\
            fi

indeed, NO STRIP occurred:

% ls -al /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3
    -rwxr-xr-x  1 root admin 109540252 Apr 26 09:03
/usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3

here's the 'make install' output ....
    ...
    make  install-exec-hook
    cd /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS ;\
    mv pgadmin3 tmp ;\
    mv tmp pgAdmin3 ;\
        echo yes ;\
    if test "yes" = "no"; then \
            strip pgAdmin3 ;\
    fi
    yes
    ...


hmmm, $pg_debug_build is reporting as YES despite  my config as:

    ./configure \
    --enable-appbundle \
    --enable-static \
    --disable-debug \
    --with-wx=/usr/local/wxWidgets-260 \
    --with-wx-config=wx-config \
    --with-pgsql=/usr/local/pgsql \
    --with-pgsql-include=/usr/local/pgsql/include

checking/verifying in "src/Makefile":
    @279
        pg_debug_build = yes

and in /.configure:
    @4872
        # Check whether --enable-debug or --disable-debug was given.
        if test "${enable_debug+set}" = set; then
          enableval="$enable_debug"
          pg_debug_build=yes
        CFLAGS="-Wall -g -O0"
        CXXFLAGS="-Wall -g -O0"
        else
          pg_debug_build=no
        fi;

looks ok (doesn't it?).

hmmm ... why/where is "pg_debug_build=no" NOT being set ...
do we need an EXPLICIT test for "--disable-debug" to set the NO case?

i'm gonna try this without the --disable-debug flag ...

>> --- (CASE wxwidgets-cvs) ------------------------------------------
>>
>> no longer requires a chmod on complete-bundle.sh
>>
>> configures OK
>>
>> 'make all' fails at:
>>
>>     ld: Undefined symbols:
>>     wxAssert(int, wchar_t const*, int, wchar_t const*, wchar_t const*)
>>     make[2]: *** [pgadmin3] Error 1
>>     make[1]: *** [all-recursive] Error 1
>>     make: *** [all] Error 2
>>
>> i'll see what i can find out abt this one ...
> Hm... the nighty build currently link against wx-cvs (because
> 2.6 wasn't released when I set the build-daemon up), and
> it links sucessfully....
>
> Did you "make clean" your source-tree after switching wx version?

actually, i'm using two separate source trees ...

    /usr/local/pgadmin3-cvs  <-- linking agains wxWidgets-260
    /usr/local/pgadmin3-cvs2 <-- linking agains wxWidgets-cvs


and when i don't do a clean DL, i always run a 'make distclean' (confirmed)

cheers,

richard

Re: pgadminIII on OSX 10.3.9; w/ wxWidgets-2.6.0

От
"Florian G. Pflug"
Дата:
OpenMacNews wrote:
> hi florian,
>> Hm.. this is strange... I works for the nightly builds...
>> In src/Makefile.am, you should find the lines:
>>          if test "$(pg_debug_build)" = "no"; then \
>>                  strip pgAdmin3 ;\
>>          fi
>>
>> Could you put an "echo $(pg_debug_build)" before the if,
>> and post the output?
>
> ok. per request,
>
>    @216
>            mv tmp pgAdmin3 ;\
>    +++     echo $(pg_debug_build) ;\
>            if test "$(pg_debug_build)" = "no"; then \
>                strip pgAdmin3 ;\
>            fi
>
...
> here's the 'make install' output ....
>    ...
>    make  install-exec-hook
>    cd /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS ;\
>    mv pgadmin3 tmp ;\
>    mv tmp pgAdmin3 ;\
>        echo yes ;\
>    if test "yes" = "no"; then \
>            strip pgAdmin3 ;\
>    fi
>    yes
>    ...
> hmmm, $pg_debug_build is reporting as YES despite  my config as:
>
>    ./configure \
>    --enable-appbundle \
>    --enable-static \
>    --disable-debug \
>    --with-wx=/usr/local/wxWidgets-260 \
>    --with-wx-config=wx-config \
>    --with-pgsql=/usr/local/pgsql \
>    --with-pgsql-include=/usr/local/pgsql/include
>
> checking/verifying in "src/Makefile":
>    @279
>        pg_debug_build = yes
>
> and in /.configure:
>    @4872
>        # Check whether --enable-debug or --disable-debug was given.
>        if test "${enable_debug+set}" = set; then
>          enableval="$enable_debug"
>          pg_debug_build=yes
>        CFLAGS="-Wall -g -O0"
>        CXXFLAGS="-Wall -g -O0"
>        else
>          pg_debug_build=no
>        fi;
Hm.. I have no idea what going on here... Is there an autoconf guru here
who might provide insight?

> hmmm ... why/where is "pg_debug_build=no" NOT being set ...
> do we need an EXPLICIT test for "--disable-debug" to set the NO case?
>
> i'm gonna try this without the --disable-debug flag ...
I just checked - the nightly builds are done with neither "--enable-debug"
nor "--disable-debug" specified, and things work correctly...

FYI, configure is autogenerated, and the snipped that checks
for the debug option is found in acinclude.m4 - but it looks
even more correct there (at least for my autoconf-unsavy eyes...)

Greetings, Florian Pflug

Вложения

Re: pgadminIII on OSX 10.3.9; w/ wxWidgets-2.6.0

От
OpenMacNews
Дата:
hi,

> Hm.. I have no idea what going on here... Is there an autoconf guru here
> who might provide insight?
>
>> hmmm ... why/where is "pg_debug_build=no" NOT being set ...
>> do we need an EXPLICIT test for "--disable-debug" to set the NO case?
>>
>> i'm gonna try this without the --disable-debug flag ...
> I just checked - the nightly builds are done with neither "--enable-debug"
> nor "--disable-debug" specified, and things work correctly...

well, i just rebuilt w/ NO debug flag in the config, i.e.:

    ./configure \
    --enable-appbundle \
    --enable-static \
    --with-wx=/usr/local/wxWidgets-260 \
    --with-wx-config=wx-config \
    --with-pgsql=/usr/local/pgsql \
    --with-pgsql-include=/usr/local/pgsql/include

NOW, the 'make install' output shows:

    ...
    make  install-exec-hook
    cd /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS ;\
    mv pgadmin3 tmp ;\
    mv tmp pgAdmin3 ;\
        echo no ;\
    if test "no" = "no"; then \
            strip pgAdmin3 ;\
    fi
    no
    ...

AND the executable IS properly stripped:

    % ls -al /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3
        -rwxr-xr-x  1 root admin 7767372 Apr 26 10:18
        /usr/ports/pgadmin3-cvs/pgAdmin3.app/Contents/MacOS/pgAdmin3

so, what we're seeing is:

    "./configure --disable-debug", fails to set pg_debug_build=no, i.e. sets =
yes.

but,

    "./configure" sets it correctly

> FYI, configure is autogenerated, and the snipped that checks
> for the debug option is found in acinclude.m4 - but it looks
> even more correct there (at least for my autoconf-unsavy eyes...)

looking in acinclude.m4:

    ###########################
    # Debug build of pgAdmin3 #
    ###########################
    AC_DEFUN([ENABLE_DEBUG],
    [AC_ARG_ENABLE(debug,
    [ --enable-debug       build a debug version of pgAdmin3],
    [pg_debug_build=yes
    CFLAGS="-Wall -g -O0"
    CXXFLAGS="-Wall -g -O0"],
    [pg_debug_build=no])
    ])
    AC_SUBST(pg_debug_build)

looks ok to me as well ...

ok, this has got to be something obvious/simple, but i'm missing it.

richard