Обсуждение: v6 beta 2 still crashes at times when viewing table results directly
XP Pro, SP2.
In threadex.c
static void _callthreadstartex(void)
{ _ptiddata ptd; /* pointer to thread's _tiddata struct */
/* must always exist at this point */ ptd = _getptd();
/* * Guard call to user code with a _try - _except statement to * implement runtime errors and signal
support */ __try { _endthreadex ( ( (unsigned (__CLR_OR_STD_CALL *)(void
*))(((_ptiddata)ptd)->_initaddr)) /******* Debugger Points Here *******/ ( ((_ptiddata)ptd)->_initarg ) )
; } __except ( _XcptFilter(GetExceptionCode(), GetExceptionInformation()) ) { /* * Should
neverreach here */ _exit( GetExceptionCode() );
} /* end of _try - _except */
}
"Unhandled exception at 0x02024ceb in pgadmin3.exe 0xC0000005; access violation writing
location 0x00000000
Installed from executeable on www.pgadmin.org.
Beta 2 certainly is much better than Beta 1.
Disassembly view:
$LN9:
78132850 C3 ret
$LN6:
78132851 8B 65 E8 mov esp,dword ptr [ebp-18h] 298: { 299: /* 300: *
Shouldnever reach here 301: */ 302: _exit( GetExceptionCode() );
78132854 FF 75 E4 push dword ptr [ebp-1Ch]
78132857 E8 DE F1 FF FF call _exit (78131A3Ah)
$LN12:
7813285C CC int 3 202: * void *ptd = pointer to _tiddata structure for this
thread 203: * 204: *Exit: 205: * Never returns - terminates thread! 206: * 207: *Exceptions: 208: * 209:
*******************************************************************************/ 210: 211: static unsigned long
WINAPI_threadstart ( 212: void * ptd 213: ) 214: { 215: _ptiddata _ptd; /*
pointerto per-thread data */ 216: 217: /* Initialize FlsGetValue function pointer */ 218:
__set_flsgetvalue();
7813285D E8 76 03 00 00 call __set_flsgetvalue (78132BD8h) 219: 220: /* 221: * Check if
ptdis initialised during THREAD_ATTACH call to dll mains 222: */ 223: if ( (_ptd =
(_ptiddata)__fls_getvalue(__get_flsindex()))== NULL)
78132862 E8 6B 03 00 00 call __get_flsindex (78132BD2h)
78132867 50 push eax
78132868 E8 50 03 00 00 call __fls_getvalue (78132BBDh)
7813286D 85 C0 test eax,eax
7813286F 75 20 jne $LN7 (78132891h) 224: { 225: /* 226: * Stash
thepointer to the per-thread data stucture in TLS 227: */ 228: if (
!__fls_setvalue(__get_flsindex(),ptd) )
78132871 FF 74 24 04 push dword ptr [esp+4]
78132875 E8 58 03 00 00 call __get_flsindex (78132BD2h)
7813287A 50 push eax
7813287B E8 82 03 00 00 call __fls_setvalue (78132C02h)
78132880 85 C0 test eax,eax
78132882 75 29 jne $LN7+1Ch (781328ADh) 229: { 230:
ExitThread(GetLastError());
78132884 FF 15 64 40 19 78 call dword ptr [__imp__GetLastError@0 (78194064h)]
7813288A 50 push eax
7813288B FF 15 5C 40 19 78 call dword ptr [__imp__ExitThread@4 (7819405Ch)] 231: } 232: }
233: else 234: { 235: _ptd->_initaddr = ((_ptiddata) ptd)->_initaddr;
78132891 8B 4C 24 04 mov ecx,dword ptr [esp+4]
78132895 8B 51 54 mov edx,dword ptr [ecx+54h]
78132898 89 50 54 mov dword ptr [eax+54h],edx 236: _ptd->_initarg = ((_ptiddata)
ptd)->_initarg;
7813289B 8B 51 58 mov edx,dword ptr [ecx+58h]
7813289E 89 50 58 mov dword ptr [eax+58h],edx 237: _ptd->_thandle = ((_ptiddata)
ptd)->_thandle;
781328A1 8B 51 04 mov edx,dword ptr [ecx+4] 238: #if defined (_M_CEE) || defined (MRTDLL) 239:
_ptd->__initDomain=((_ptiddata) ptd)->__initDomain; 240: #endif /* defined (_M_CEE) || defined (MRTDLL) */ 241:
_freefls(ptd);
781328A4 51 push ecx
781328A5 89 50 04 mov dword ptr [eax+4],edx
781328A8 E8 FA 04 00 00 call _freefls (78132DA7h) 242: ptd = _ptd; 243: } 244: 245:
/* 246: * Call fp initialization, if necessary 247: */ 248: #ifndef MRTDLL 249: #ifdef
CRTDLL 250: _fpclear();
781328AD E8 3D 69 01 00 call _fpclear (781491EFh) 251: #else /* CRTDLL */ 252: if (_FPmtinit !=
NULL&& 253: _IsNonwritableInCurrentImage((PBYTE)&_FPmtinit)) 254: { 255:
(*_FPmtinit)(); 256: } 257: #endif /* CRTDLL */ 258: #endif /* MRTDLL */ 259: 260: #if defined (_M_CEE)
||defined (MRTDLL) 261: DWORD domain=0; 262: if(!_getdomain(&domain)) 263: { 264:
ExitThread(0); 265: } 266: if(domain!=_ptd->__initDomain) 267: { 268: /* need
totransition to caller's domain and startup there*/ 269: ::msclr::call_in_appdomain(_ptd->__initDomain,
_callthreadstart); 270: 271: return 0L; 272: } 273: #endif /* defined (_M_CEE) || defined
(MRTDLL)*/ 274: 275: _callthreadstart();
781328B2 E8 65 FF FF FF call _callthreadstart (7813281Ch)
$LN8:
781328B7 CC int 3 1: /*** 2: *thread.c - Begin and end a thread 3: * 4: *
Copyright(c) Microsoft Corporation. All rights reserved. 5: * 6: *Purpose: 7: * This source contains the
_beginthread()and _endthread() 8: * routines which are used to start and terminate a thread. 9: * 10:
*******************************************************************************/ 11: 12: 13: #include
<cruntime.h> 14: #include <oscalls.h> 15: #include <internal.h> 16: #include <mtdll.h> 17: #include <msdos.h>
18:#include <malloc.h> 19: #include <process.h> 20: #include <stddef.h> 21: #include <rterr.h> 22: #include
<dbgint.h> 23: #include <errno.h> 24: #if defined (_M_CEE) || defined (MRTDLL) 25: #include <msclr\appdomain.h>
26:#endif /* defined (_M_CEE) || defined (MRTDLL) */ 27: 28: #pragma warning(disable:4439) // C4439: function
witha managed parameter must
have a __clrcall calling convention 29: 30: /* 31: * Startup code for new thread. 32: */ 33: static
unsignedlong WINAPI _threadstart(void *); 34: static void _callthreadstart(void); 35: 36: /* 37: * declare
pointersto per-thread FP initialization and termination routines. 38: * Note that this initialization is only done
innative, not managed. 39: */ 40: #if !defined (MRTDLL) && !defined (CRTDLL) 41: const _PVFV _FPmtinit; 42:
const_PVFV _FPmtterm; 43: #endif /* !defined (MRTDLL) && !defined (CRTDLL) */ 44: 45: #if defined (_M_CEE) ||
defined(MRTDLL) 46: static int _getdomain(DWORD *pDomain) 47: { 48: *pDomain=0; 49: ICLRRuntimeHost
*pClrHost= NULL; 50: 51: HRESULT hr = CorBindToRuntimeEx( 52: NULL, // version
ofthe runtime to request 53: NULL, // flavor of the runtime to request 54: 0,
// runtime startup flags 55: CLSID_CLRRuntimeHost, // clsid of ICLRRuntimeHost
56: IID_ICLRRuntimeHost, // IID of ICLRRuntimeHost 57: (PVOID*)&pClrHost); // a
pointerto our punk that we get back 58: 59: if (FAILED(hr)) 60: { 61: if (pClrHost != NULL)
62: { 63: pClrHost->Release(); 64: } 65: return false; 66: } 67:
68: DWORD domain=0; 69: hr=pClrHost->GetCurrentAppDomainId(&domain); 70: pClrHost->Release(); 71:
pClrHost=NULL; 72: if (FAILED(hr)) 73: { 74: return false; 75: } 76: *pDomain=domain;
77: return true; 78: } 79: #endif /* defined (_M_CEE) || defined (MRTDLL) */ 80: 81: /*** 82:
*_beginthread()- Create a child thread 83: * 84: *Purpose: 85: * Create a child thread. 86: * 87:
*Entry: 88: * initialcode = pointer to thread's startup code address 89: * stacksize = size of stack
90:* argument = argument to be passed to new thread 91: * 92: *Exit: 93: * success = handle for new
threadif successful 94: * 95: * failure = (unsigned long) -1L in case of error, errno and _doserrno 96: *
are set 97: * 98: *Exceptions: 99: * 100:
*******************************************************************************/ 101: 102: _MCRTIMP uintptr_t __cdecl
_beginthread( 103: void (__CLRCALL_OR_CDECL * initialcode) (void *), 104: unsigned stacksize, 105:
void * argument 106: ) 107: {
781328B8 55 push ebp
781328B9 8B EC mov ebp,esp
781328BB 51 push ecx
781328BC 53 push ebx
781328BD 57 push edi 108: _ptiddata ptd; /* pointer to per-thread data
*/ 109: uintptr_t thdl; /* thread handle */ 110: unsigned long err = 0L; /* Return
fromGetLastError() */ 111: 112: /* validation section */ 113: _VALIDATE_RETURN(initialcode != NULL,
EINVAL,-1);
781328BE 8B 7D 08 mov edi,dword ptr [initialcode]
781328C1 33 DB xor ebx,ebx
781328C3 3B FB cmp edi,ebx
781328C5 89 5D FC mov dword ptr [err],ebx
781328C8 75 20 jne _beginthread+32h (781328EAh)
781328CA E8 E3 19 00 00 call _errno (781342B2h)
781328CF 53 push ebx
781328D0 53 push ebx
781328D1 53 push ebx
781328D2 53 push ebx
781328D3 53 push ebx
781328D4 C7 00 16 00 00 00 mov dword ptr [eax],16h
781328DA E8 81 5F 00 00 call _invalid_parameter (78138860h)
781328DF 83 C4 14 add esp,14h
781328E2 83 C8 FF or eax,0FFFFFFFFh
781328E5 E9 81 00 00 00 jmp error_return+1Dh (7813296Bh)
781328EA 56 push esi 114: 115: /* Initialize FlsGetValue function pointer */ 116:
__set_flsgetvalue();
781328EB E8 E8 02 00 00 call __set_flsgetvalue (78132BD8h) 117: 118: /* 119: * Allocate
andinitialize a per-thread data structure for the to- 120: * be-created thread. 121: */ 122:
if ( (ptd = (_ptiddata)_calloc_crt(1, sizeof(struct _tiddata))) == NULL )
781328F0 68 14 02 00 00 push 214h
781328F5 6A 01 push 1
781328F7 E8 E7 1D 00 00 call _calloc_crt (781346E3h)
781328FC 8B F0 mov esi,eax
781328FE 3B F3 cmp esi,ebx
78132900 59 pop ecx
78132901 59 pop ecx
78132902 74 4A je error_return (7813294Eh) 123: { 124: goto error_return;
125: } 126: 127: /* 128: * Initialize the per-thread data 129: */ 130: 131:
_initptd(ptd, _getptd()->ptlocinfo);
78132904 E8 86 04 00 00 call _getptd (78132D8Fh)
78132909 FF 70 6C push dword ptr [eax+6Ch]
7813290C 56 push esi
7813290D E8 46 03 00 00 call _initptd (78132C58h) 132: 133: ptd->_initaddr = (void *) initialcode;
134: ptd->_initarg = argument;
78132912 8B 45 10 mov eax,dword ptr [argument]
78132915 59 pop ecx
78132916 59 pop ecx 135: 136: #if defined (_M_CEE) || defined (MRTDLL) 137:
if(!_getdomain(&(ptd->__initDomain))) 138: { 139: goto error_return; 140: } 141: #endif
/*defined (_M_CEE) || defined (MRTDLL) */ 142: 143: /* 144: * Create the new thread. Bring it up
ina suspended state so that 145: * the _thandle and _tid fields are filled in before execution 146:
*starts. 147: */ 148: if ( (ptd->_thandle = thdl = (uintptr_t) 149: CreateThread(
NULL, 150: stacksize, 151: _threadstart, 152:
(LPVOID)ptd, 153: CREATE_SUSPENDED, 154:
(LPDWORD)&(ptd->_tid))) 155: == (uintptr_t)0 )
78132917 56 push esi
78132918 6A 04 push 4
7813291A 56 push esi
7813291B 68 5D 28 13 78 push offset _threadstart (7813285Dh)
78132920 FF 75 0C push dword ptr [stacksize]
78132923 89 7E 54 mov dword ptr [esi+54h],edi
78132926 53 push ebx
78132927 89 46 58 mov dword ptr [esi+58h],eax
7813292A FF 15 6C 40 19 78 call dword ptr [__imp__CreateThread@24 (7819406Ch)]
78132930 8B F8 mov edi,eax
78132932 3B FB cmp edi,ebx
78132934 89 7E 04 mov dword ptr [esi+4],edi 156: { 157: err =
GetLastError(); 158: goto error_return;
78132937 74 0C je _beginthread+8Dh (78132945h) 159: } 160: 161: /* 162:
* Start the new thread executing 163: */ 164: if ( ResumeThread( (HANDLE)thdl ) == (DWORD)(-1) )
{
78132939 57 push edi
7813293A FF 15 68 40 19 78 call dword ptr [__imp__ResumeThread@4 (78194068h)]
78132940 83 F8 FF cmp eax,0FFFFFFFFh
78132943 75 23 jne error_return+1Ah (78132968h) 165: err = GetLastError();
78132945 FF 15 64 40 19 78 call dword ptr [__imp__GetLastError@0 (78194064h)]
7813294B 89 45 FC mov dword ptr [err],eax 166: goto error_return; 167: }
168: 169: /* 170: * Good return 171: */ 172: return(thdl); 173: 174:
/* 175: * Error return 176: */ 177: error_return: 178: /* 179: * Either ptd is
NULL,or it points to the no-longer-necessary block 180: * calloc-ed for the _tiddata struct which should now
befreed up. 181: */ 182: _free_crt(ptd);
7813294E 56 push esi
7813294F E8 7E 21 00 00 call free (78134AD2h) 183: 184: /* 185: * Map the error, if
necessary. 186: */ 187: if ( err != 0L )
78132954 39 5D FC cmp dword ptr [err],ebx
78132957 59 pop ecx
78132958 74 09 je error_return+15h (78132963h) 188: _dosmaperr(err);
7813295A FF 75 FC push dword ptr [err]
7813295D E8 76 19 00 00 call _dosmaperr (781342D8h)
78132962 59 pop ecx 189: 190: return( (uintptr_t)(-1) );
78132963 83 C8 FF or eax,0FFFFFFFFh
78132966 EB 02 jmp error_return+1Ch (7813296Ah) 166: goto error_return; 167:
} 168: 169: /* 170: * Good return 171: */ 172: return(thdl);
78132968 8B C7 mov eax,edi
7813296A 5E pop esi
7813296B 5F pop edi
7813296C 5B pop ebx 191: }
7813296D C9 leave
7813296E C3 ret
--- f:\rtm\vctools\crt_bld\self_x86\crt\src\threadex.c ------------------------- 373: * Never returns! 374: *
375:*Exceptions: 376: * 377: *******************************************************************************/ 378:
379:void __cdecl _endthreadex ( 380: unsigned retcode 381: ) 382: { 383: _ptiddata ptd;
/* pointer to thread's _tiddata struct */ 384: 385: /* 386: * Call fp termination, if
necessary 387: */ 388: #ifdef CRTDLL 389: _fpclear();
7813296F E8 7B 68 01 00 call _fpclear (781491EFh) 390: #else /* CRTDLL */ 391: if (_FPmtterm !=
NULL&& 392: _IsNonwritableInCurrentImage((PBYTE)&_FPmtterm)) 393: { 394:
(*_FPmtterm)(); 395: } 396: #endif /* CRTDLL */ 397: 398: ptd = _getptd_noexit();
78132974 E8 93 03 00 00 call _getptd_noexit (78132D0Ch) 399: 400: if (ptd) {
78132979 85 C0 test eax,eax
7813297B 74 07 je _endthreadex+15h (78132984h) 401: /* 402: * Free up
the_tiddata structure & its subordinate buffers 403: * _freeptd() will also clear the value for this
thread 404: * of the FLS variable __flsindex. 405: */ 406: _freeptd(ptd);
7813297D 50 push eax
7813297E E8 45 05 00 00 call _freeptd (78132EC8h)
78132983 59 pop ecx 407: } 408: 409: /* 410: * Terminate the
thread 411: */ 412: ExitThread(retcode);
78132984 FF 74 24 04 push dword ptr [esp+4]
78132988 FF 15 5C 40 19 78 call dword ptr [__imp__ExitThread@4 (7819405Ch)]
$LN5:
7813298E CC int 3 319: /* need to transition to caller's domain and startup
there*/ 320: ::msclr::call_in_appdomain(_ptd->__initDomain, _callthreadstartex); 321: 322:
return0L; 323: } 324: #endif /* defined (_M_CEE) || defined (MRTDLL) */ 325: 326:
_callthreadstartex(); 327: 328: /* 329: * Never executed! 330: */ 331:
return(0L); 332: } 333: 334: static void _callthreadstartex(void) 335: {
7813298F 6A 0C push 0Ch
78132991 68 B8 4B 1B 78 push offset ___rtc_tzz+84h (781B4BB8h)
78132996 E8 DD 60 00 00 call __SEH_prolog4 (78138A78h) 336: _ptiddata ptd; /* pointer to
thread's_tiddata struct */ 337: 338: /* must always exist at this point */ 339: ptd = _getptd();
7813299B E8 EF 03 00 00 call _getptd (78132D8Fh) 340: 341: /* 342: * Guard call to user code
witha _try - _except statement to 343: * implement runtime errors and signal support 344: */ 345:
__try {
781329A0 83 65 FC 00 and dword ptr [ebp-4],0 346: _endthreadex ( 347: (
(unsigned(__CLR_OR_STD_CALL *)(v
--
Open WebMail Project (http://openwebmail.org)
> -----Original Message-----
> From: pgadmin-support-owner@postgresql.org
> [mailto:pgadmin-support-owner@postgresql.org] On Behalf Of Mike G
> Sent: 10 October 2006 23:26
> To: pgadmin-support@postgresql.org
> Subject: [pgadmin-support] v6 beta 2 still crashes at times
> when viewing table results directly
>
> XP Pro, SP2.
>
> In threadex.c
>
> static void _callthreadstartex(void)
> {
> _ptiddata ptd; /* pointer to thread's _tiddata struct */
>
> /* must always exist at this point */
> ptd = _getptd();
>
> /*
> * Guard call to user code with a _try - _except statement to
> * implement runtime errors and signal support
> */
> __try {
> _endthreadex (
> ( (unsigned (__CLR_OR_STD_CALL *)(void
> *))(((_ptiddata)ptd)->_initaddr) )
> /******* Debugger Points Here *******/ (
> ((_ptiddata)ptd)->_initarg ) ) ;
> }
> __except ( _XcptFilter(GetExceptionCode(),
> GetExceptionInformation()) )
> {
> /*
> * Should never reach here
> */
> _exit( GetExceptionCode() );
>
> } /* end of _try - _except */
>
> }
>
> "Unhandled exception at 0x02024ceb in pgadmin3.exe
> 0xC0000005; access violation writing
> location 0x00000000
> Installed from executeable on www.pgadmin.org.
Hi Mike,
Is this in the query tool, or the view data grid?
Threadex.c is part of the CRT, so is pretty far removed from our code -
are you able to get a backtrace please?
>
> Beta 2 certainly is much better than Beta 1.
That's very odd, because there haven't been any changes in the threaded
query code between those versions. I wonder if this is another
perspective-related red herring. Can you try selecting the 'Default
View' option from the view emnu of the affected window please?
Thanks, Dave
I have the crash when selecting a table, right clicking, selecting View
Data->View All Rows or sometimes the View Top 100 rows.
Pgadmin starts to display the data in the table and then aborts.
I have a minidump from the last crash if that would help. Otherwise I
will try to build it from source and then run it.
I can't say it happens all the time. It is usually after the 3rd or 4th
time I open a table does it decide to crash.
Mike
On Wed, 2006-10-11 at 10:30 +0100, Dave Page wrote:
>
> > -----Original Message-----
> > From: pgadmin-support-owner@postgresql.org
> > [mailto:pgadmin-support-owner@postgresql.org] On Behalf Of Mike G
> > Sent: 10 October 2006 23:26
> > To: pgadmin-support@postgresql.org
> > Subject: [pgadmin-support] v6 beta 2 still crashes at times
> > when viewing table results directly
> >
> > XP Pro, SP2.
> >
> > In threadex.c
> >
> > static void _callthreadstartex(void)
> > {
> > _ptiddata ptd; /* pointer to thread's _tiddata struct */
> >
> > /* must always exist at this point */
> > ptd = _getptd();
> >
> > /*
> > * Guard call to user code with a _try - _except statement to
> > * implement runtime errors and signal support
> > */
> > __try {
> > _endthreadex (
> > ( (unsigned (__CLR_OR_STD_CALL *)(void
> > *))(((_ptiddata)ptd)->_initaddr) )
> > /******* Debugger Points Here *******/ (
> > ((_ptiddata)ptd)->_initarg ) ) ;
> > }
> > __except ( _XcptFilter(GetExceptionCode(),
> > GetExceptionInformation()) )
> > {
> > /*
> > * Should never reach here
> > */
> > _exit( GetExceptionCode() );
> >
> > } /* end of _try - _except */
> >
> > }
> >
> > "Unhandled exception at 0x02024ceb in pgadmin3.exe
> > 0xC0000005; access violation writing
> > location 0x00000000
> > Installed from executeable on www.pgadmin.org.
>
> Hi Mike,
>
> Is this in the query tool, or the view data grid?
>
> Threadex.c is part of the CRT, so is pretty far removed from our code -
> are you able to get a backtrace please?
>
> >
> > Beta 2 certainly is much better than Beta 1.
>
> That's very odd, because there haven't been any changes in the threaded
> query code between those versions. I wonder if this is another
> perspective-related red herring. Can you try selecting the 'Default
> View' option from the view emnu of the affected window please?
>
> Thanks, Dave
>
> ---------------------------(end of broadcast)---------------------------
> TIP 2: Don't 'kill -9' the postmaster
It really happens with me too. I am worried with it. Even
2006/10/11, mike <mike@thegodshalls.com>:
> I have the crash when selecting a table, right clicking, selecting View
> Data->View All Rows or sometimes the View Top 100 rows.
>
> Pgadmin starts to display the data in the table and then aborts.
>
> I have a minidump from the last crash if that would help. Otherwise I
> will try to build it from source and then run it.
>
> I can't say it happens all the time. It is usually after the 3rd or 4th
> time I open a table does it decide to crash.
>
> Mike
>
> On Wed, 2006-10-11 at 10:30 +0100, Dave Page wrote:
> >
> > > -----Original Message-----
> > > From: pgadmin-support-owner@postgresql.org
> > > [mailto:pgadmin-support-owner@postgresql.org] On Behalf Of Mike G
> > > Sent: 10 October 2006 23:26
> > > To: pgadmin-support@postgresql.org
> > > Subject: [pgadmin-support] v6 beta 2 still crashes at times
> > > when viewing table results directly
> > >
> > > XP Pro, SP2.
> > >
> > > In threadex.c
> > >
> > > static void _callthreadstartex(void)
> > > {
> > > _ptiddata ptd; /* pointer to thread's _tiddata struct */
> > >
> > > /* must always exist at this point */
> > > ptd = _getptd();
> > >
> > > /*
> > > * Guard call to user code with a _try - _except statement to
> > > * implement runtime errors and signal support
> > > */
> > > __try {
> > > _endthreadex (
> > > ( (unsigned (__CLR_OR_STD_CALL *)(void
> > > *))(((_ptiddata)ptd)->_initaddr) )
> > > /******* Debugger Points Here *******/ (
> > > ((_ptiddata)ptd)->_initarg ) ) ;
> > > }
> > > __except ( _XcptFilter(GetExceptionCode(),
> > > GetExceptionInformation()) )
> > > {
> > > /*
> > > * Should never reach here
> > > */
> > > _exit( GetExceptionCode() );
> > >
> > > } /* end of _try - _except */
> > >
> > > }
> > >
> > > "Unhandled exception at 0x02024ceb in pgadmin3.exe
> > > 0xC0000005; access violation writing
> > > location 0x00000000
> > > Installed from executeable on www.pgadmin.org.
> >
> > Hi Mike,
> >
> > Is this in the query tool, or the view data grid?
> >
> > Threadex.c is part of the CRT, so is pretty far removed from our code -
> > are you able to get a backtrace please?
> >
> > >
> > > Beta 2 certainly is much better than Beta 1.
> >
> > That's very odd, because there haven't been any changes in the threaded
> > query code between those versions. I wonder if this is another
> > perspective-related red herring. Can you try selecting the 'Default
> > View' option from the view emnu of the affected window please?
> >
> > Thanks, Dave
> >
> > ---------------------------(end of broadcast)---------------------------
> > TIP 2: Don't 'kill -9' the postmaster
>
>
> ---------------------------(end of broadcast)---------------------------
> TIP 5: don't forget to increase your free space map settings
>
-- =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Atenciosamente(Sincerely) Ezequias Rodrigues da
Rocha=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
A pior das democracias ainda é melhor do que a melhor das ditaduras
The worst of democracies is still better than the better of dictatorshipshttp://ezequiasrocha.blogspot.com/
On 11/10/06 20:23, "mike" <mike@thegodshalls.com> wrote: > I have the crash when selecting a table, right clicking, selecting View > Data->View All Rows or sometimes the View Top 100 rows. > > Pgadmin starts to display the data in the table and then aborts. > > I have a minidump from the last crash if that would help. Otherwise I > will try to build it from source and then run it. Please send it over - I'll see if I can get any sense out of it. If you can get it to crash in a debugger as well though, that will probably be very helpful - whilst I did see some random crashes in the edit grid a few months ago, I haven't seen any on Mac or Windows for a long time (and I'm using SVN trunk almost daily on Windows). > I can't say it happens all the time. It is usually after the 3rd or 4th > time I open a table does it decide to crash. Hmm. Thanks, Dave.
On 11/10/06 20:28, "Ezequias Rodrigues da Rocha" <ezequias.rocha@gmail.com> wrote: > It really happens with me too. I am worried with it. Even Yes, but you haven't answered any of my questions on the subject which is making it difficult to help you. Regards, Dave.
Dump attached. On Wed, 11 Oct 2006 20:33:15 +0100, Dave Page wrote > On 11/10/06 20:23, "mike" <mike@thegodshalls.com> wrote: > > > I have the crash when selecting a table, right clicking, selecting View > > Data->View All Rows or sometimes the View Top 100 rows. > > > > Pgadmin starts to display the data in the table and then aborts. > > > > I have a minidump from the last crash if that would help. Otherwise I > > will try to build it from source and then run it. > > Please send it over - I'll see if I can get any sense out of it. If you can > get it to crash in a debugger as well though, that will probably be very > helpful - whilst I did see some random crashes in the edit grid a few months > ago, I haven't seen any on Mac or Windows for a long time (and I'm using SVN > trunk almost daily on Windows). > > > I can't say it happens all the time. It is usually after the 3rd or 4th > > time I open a table does it decide to crash. > > Hmm. > > Thanks, Dave. -- Open WebMail Project (http://openwebmail.org)
Вложения
> -----Original Message----- > From: Mike G [mailto:mike@thegodshalls.com] > Sent: 11 October 2006 20:46 > To: Dave Page > Cc: pgadmin-support@postgresql.org > Subject: Re: [pgadmin-support] v6 beta 2 still crashes at > times whenviewing table results directly > > Dump attached. > Hi Mike, I've found a couple of issues that might be causing this... The first was that the edit grid was allowing the refresh button to be pressed at will, which meant it was possible to start a second refresh whilst the first query thread was still running. I could reproduce this by simply banging F5 a few times without waiting for the previous data load to end. I've fixed this by locking out all methods of refreshing until the previous call (which may be the initial data load) has completed. The second issue would have affected the Query Tool as well, so may be what Harald was seeing. Essentially, the pgQueryThread class was calling logging functions in it's query thread which does not appear to be safe. I've moved all logging so it's in the main app thread and could no longer reproduce this issue (though I couldn't exactly reproduce it at will previously, so that isn't proof I've actually fixed it). These changes will be in the upcoming beta 3. Regards, Dave.
Hi Dave, I have been testing beta 3 this morning and it crashed on me again. The debugger pointed in the same location as last time. I was trying to view a table that a few seconds ago had over 70000 records in it, had just truncated it and only inserted 5 records back into it. Of course trying to reproduce it again didn't work. I have been trying to build from the source code but have encountered some errors. Can the project file included in the beta sources be used to build the beta versions? If you or someone else would be willing to help me get through the errors I will try to run a debug version. Mike On Thu, 12 Oct 2006 12:31:07 +0100, Dave Page wrote > > -----Original Message----- > > From: Mike G [mailto:mike@thegodshalls.com] > > Sent: 11 October 2006 20:46 > > To: Dave Page > > Cc: pgadmin-support@postgresql.org > > Subject: Re: [pgadmin-support] v6 beta 2 still crashes at > > times whenviewing table results directly > > > > Dump attached. > > > > Hi Mike, > > I've found a couple of issues that might be causing this... > > The first was that the edit grid was allowing the refresh button to be > pressed at will, which meant it was possible to start a second refresh > whilst the first query thread was still running. I could reproduce this > by simply banging F5 a few times without waiting for the previous data > load to end. I've fixed this by locking out all methods of refreshing > until the previous call (which may be the initial data load) has > completed. > > The second issue would have affected the Query Tool as well, so may be > what Harald was seeing. Essentially, the pgQueryThread class was calling > logging functions in it's query thread which does not appear to be safe. > I've moved all logging so it's in the main app thread and could no > longer reproduce this issue (though I couldn't exactly reproduce it at > will previously, so that isn't proof I've actually fixed it). > > These changes will be in the upcoming beta 3. > > Regards, Dave. -- Open WebMail Project (http://openwebmail.org)