Обсуждение: configure readline error
Hello, I'm having trouble with ./configure for Postgres 7.3.3 on a RH7.3 i686 system. .... checking for readline... no readline library not found if you have readline already installed ..... I've gone through config.log and it looks like it searches the correct locations. I have gnu readline 4.1 installed and can find libs in /usr/local/lib/libreadline.a and headers in /usr/local/lib/include/readline/*.h. I configured with ./configure --with-includes=/usr/local/lib:/usr/local/lib/include/readline --with-libraries=/usr/local/lib:/usr/local/lib/include/readline --with-perl --with-openssl --with-syslog Unfortunately I keep getting the error. I've searched numerous lists, groups, faqs, etc. but cannot seem to resolve the issue. Any help would be greatly appreciated. Thanx in advance! johnmac
John McGloughlin <johnmac@mcgloughlingroup.com> writes:
> checking for readline... no
> readline library not found
> I've gone through config.log and it looks like it searches the correct
> locations.
"not found" in this context would probably be better read as "something
went wrong but I dunno what". A likely possibility is that the readline
library needs some secondary library that configure didn't try
including. Could we see the full config.log results?
> I have gnu readline 4.1 installed and can find libs in
> /usr/local/lib/libreadline.a and headers in
> /usr/local/lib/include/readline/*.h.
> I configured with ./configure
> --with-includes=/usr/local/lib:/usr/local/lib/include/readline
> --with-libraries=/usr/local/lib:/usr/local/lib/include/readline
Hm, I think those paths ought to be just
--with-includes=/usr/local/lib:/usr/local/lib/include
--with-libraries=/usr/local/lib
but not sure if that accounts for your problem ... also, readline 4.1
is long in the tooth, an update to 4.2 might help ...
regards, tom lane
Thanx for the quick response.
>checking for readline... no
>readline library not found
>
>I have gnu readline 4.1 installed and can find libs in
>/usr/local/lib/libreadline.a and headers in
>/usr/local/lib/include/readline/*.h.
>
>
>I configured with ./configure
>--with-includes=/usr/local/lib:/usr/local/lib/include/readline
>--with-libraries=/usr/local/lib:/usr/local/lib/include/readline
>
>
Tome Lane wrote:
> Hm, I think those paths ought to be just
> --with-includes=/usr/local/lib:/usr/local/lib/include
> --with-libraries=/usr/local/lib
> but not sure if that accounts for your problem ... also, readline 4.1
> is long in the tooth, an update to 4.2 might help ...
>> OK - I've installed 4.3 and changed the lib directives
>I've gone through config.log and it looks like it searches the correct
>locations.
>
>
> "not found" in this context would probably be better read as "something
> went wrong but I dunno what". A likely possibility is that the readline
> library needs some secondary library that configure didn't try
> including. Could we see the full config.log results?
>> config.log (sorry for the BIG file ... wasn't sure if you wanted the
whole thing or not
$ ./configure --with-libraries=/usr/local/lib
--with-includes=/usr/local/lib:/usr/local/include --with-perl
--with-openssl --enable-syslog
## --------- ##
## Platform. ##
## --------- ##
hostname = xxxxxxxxxxxxxxxxxx
uname -m = i686
uname -r = 2.4.18-3
uname -s = Linux
uname -v = #1 Thu Apr 18 07:37:53 EDT 2002
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = i686
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: .
PATH: /bin
PATH: /usr/bin
PATH: /usr/local/bin
PATH: /bin
PATH: /usr/bin
PATH: /usr/X11R6/bin
PATH: /usr/sbin
PATH: /home/johnmac/bin
PATH: /usr/local/ant/bin
## ----------- ##
## Core tests. ##
## ----------- ##
configure:1295: checking build system type
configure:1313: result: i686-pc-linux-gnu
configure:1321: checking host system type
configure:1335: result: i686-pc-linux-gnu
configure:1345: checking which template to use
configure:1444: result: linux
configure:1563: checking whether to build with 64-bit integer date/time
support
configure:1594: result: no
configure:1600: checking whether to build with recode support
configure:1631: result: no
configure:1638: checking whether NLS is wanted
configure:1672: result: no
configure:1680: checking for default port number
configure:1709: result: 5432
configure:1727: checking for default soft limit on number of connections
configure:1756: result: 32
configure:1947: checking for gcc
configure:1963: found /usr/bin/gcc
configure:1973: result: gcc
configure:1992: checking for C compiler version
configure:1995: gcc --version </dev/null >&5
2.96
configure:1998: $? = 0
configure:2000: gcc -v </dev/null >&5
Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/2.96/specs
gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-113)
configure:2003: $? = 0
configure:2005: gcc -V </dev/null >&5
gcc: argument to `-V' is missing
configure:2008: $? = 1
configure:2034: checking for C compiler default output
configure:2037: gcc conftest.c >&5
configure:2040: $? = 0
configure:2073: result: a.out
configure:2078: checking whether the C compiler works
configure:2084: ./a.out
configure:2087: $? = 0
configure:2102: result: yes
configure:2109: checking whether we are cross compiling
configure:2111: result: no
configure:2114: checking for suffix of executables
configure:2116: gcc -o conftest conftest.c >&5
configure:2119: $? = 0
configure:2141: result:
configure:2147: checking for suffix of object files
configure:2171: gcc -c conftest.c >&5
configure:2174: $? = 0
configure:2193: result: o
configure:2197: checking whether we are using the GNU C compiler
configure:2224: gcc -c conftest.c >&5
configure:2227: $? = 0
configure:2230: test -s conftest.o
configure:2233: $? = 0
configure:2245: result: yes
configure:2251: checking whether gcc accepts -g
configure:2275: gcc -c -g conftest.c >&5
configure:2278: $? = 0
configure:2281: test -s conftest.o
configure:2284: $? = 0
configure:2294: result: yes
configure:2321: gcc -c -g -O2 conftest.c >&5
conftest.c:2: parse error before `me'
configure:2324: $? = 1
configure: failed program was:
#ifndef __cplusplus
choke me
#endif
configure:2443: using CFLAGS=-O2
configure:2447: checking whether the C compiler still works
configure:2469: gcc -o conftest -O2 conftest.c >&5
configure:2472: $? = 0
configure:2475: test -s conftest
configure:2478: $? = 0
configure:2480: result: yes
configure:2516: gcc -c -O2 conftest.c >&5
configure:2519: $? = 0
configure:2522: test -s conftest.o
configure:2525: $? = 0
configure:2543: checking how to run the C preprocessor
configure:2569: gcc -E conftest.c
configure:2575: $? = 0
configure:2602: gcc -E conftest.c
configure:2598:28: ac_nonexistent.h: No such file or directory
configure:2608: $? = 1
configure: failed program was:
#line 2597 "configure"
#include "confdefs.h"
#include <ac_nonexistent.h>
configure:2645: result: gcc -E
configure:2660: gcc -E conftest.c
configure:2666: $? = 0
configure:2693: gcc -E conftest.c
configure:2689:28: ac_nonexistent.h: No such file or directory
configure:2699: $? = 1
configure: failed program was:
#line 2688 "configure"
#include "confdefs.h"
#include <ac_nonexistent.h>
configure:2856: checking whether to build with Tcl
configure:2884: result: no
configure:2889: checking whether to build with Tk
configure:2921: result: no
configure:2987: checking whether to build Perl modules
configure:3015: result: yes
configure:3022: checking whether to build Python modules
configure:3050: result: no
configure:3057: checking whether to build Java/JDBC tools
configure:3195: result: no
configure:3205: checking whether to build with Kerberos 4 support
configure:3252: result: no
configure:3263: checking whether to build with Kerberos 5 support
configure:3310: result: no
configure:3368: checking whether to build with PAM support
configure:3400: result: no
configure:3435: result: building with OpenSSL support
configure:3553: using CPPFLAGS= -I/usr/local/lib -I/usr/local/include
configure:3555: using LDFLAGS= -L/usr/local/lib
configure:3563: checking for gawk
configure:3579: found /bin/gawk
configure:3589: result: gawk
configure:3599: checking for flex
configure:3638: result: /usr/local/bin/flex
configure:3673: checking whether ln -s works
configure:3677: result: yes
configure:3695: checking for ld used by GCC
configure:3758: result: /usr/bin/ld
configure:3767: checking if the linker (/usr/bin/ld) is GNU ld
GNU ld version 2.11.93.0.2 20020207
configure:3779: result: yes
configure:3880: checking for ranlib
configure:3896: found /usr/bin/ranlib
configure:3907: result: ranlib
configure:3923: checking for lorder
configure:3952: result: no
configure:3961: checking for tar
configure:3979: found /bin/tar
configure:3991: result: /bin/tar
configure:4040: checking for strip
configure:4056: found /usr/bin/strip
configure:4067: result: strip
configure:4080: checking whether it is possible to strip libraries
configure:4085: result: yes
configure:4101: checking for bison
configure:4117: found /usr/local/bin/bison
configure:4127: result: bison -y
configure:4159: checking for perl
configure:4177: found /usr/bin/perl
configure:4189: result: /usr/bin/perl
configure:4198: checking for Perl archlibexp
configure:4201: result: /usr/local/lib/perl5/5.8.0/i686-linux
configure:4203: checking for Perl privlibexp
configure:4206: result: /usr/local/lib/perl5/5.8.0
configure:4208: checking for Perl useshrplib
configure:4211: result: false
configure:4214: checking for flags to link embedded Perl
configure:4219: result: -L/usr/local/lib
/usr/local/lib/perl5/5.8.0/i686-linux/auto/DynaLoader/DynaLoader.a
-L/usr/local/lib/perl5/5.8.0/i686-linux/CORE -lperl -lnsl -ldl -lm -lc
-lcrypt -lutil
configure:4330: checking for main in -lbsd
configure:4357: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lbsd >&5
configure:4360: $? = 0
configure:4363: test -s conftest
configure:4366: $? = 0
configure:4377: result: yes
configure:4390: checking for setproctitle in -lutil
configure:4423: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lutil -lbsd >&5
/tmp/cc25FbDB.o: In function `main':
/tmp/cc25FbDB.o(.text+0x7): undefined reference to `setproctitle'
collect2: ld returned 1 exit status
configure:4426: $? = 1
configure: failed program was:
#line 4397 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char setproctitle ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
setproctitle ();
;
return 0;
}
configure:4443: result: no
configure:4455: checking for main in -lm
configure:4482: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lm -lbsd >&5
configure:4485: $? = 0
configure:4488: test -s conftest
configure:4491: $? = 0
configure:4502: result: yes
configure:4514: checking for main in -ldl
configure:4541: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -ldl -lm -lbsd >&5
configure:4544: $? = 0
configure:4547: test -s conftest
configure:4550: $? = 0
configure:4561: result: yes
configure:4573: checking for main in -lnsl
configure:4600: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lnsl -ldl -lm
-lbsd >&5
configure:4603: $? = 0
configure:4606: test -s conftest
configure:4609: $? = 0
configure:4620: result: yes
configure:4632: checking for main in -lsocket
configure:4659: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lsocket -lnsl -ldl
-lm -lbsd >&5
/usr/bin/ld: cannot find -lsocket
collect2: ld returned 1 exit status
configure:4662: $? = 1
configure: failed program was:
#line 4639 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:4679: result: no
configure:4691: checking for main in -lipc
configure:4718: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lipc -lnsl -ldl -lm
-lbsd >&5
/usr/bin/ld: cannot find -lipc
collect2: ld returned 1 exit status
configure:4721: $? = 1
configure: failed program was:
#line 4698 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:4738: result: no
configure:4750: checking for main in -lIPC
configure:4777: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lIPC -lnsl -ldl -lm
-lbsd >&5
/usr/bin/ld: cannot find -lIPC
collect2: ld returned 1 exit status
configure:4780: $? = 1
configure: failed program was:
#line 4757 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:4797: result: no
configure:4809: checking for main in -llc
configure:4836: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -llc -lnsl -ldl -lm
-lbsd >&5
/usr/bin/ld: cannot find -llc
collect2: ld returned 1 exit status
configure:4839: $? = 1
configure: failed program was:
#line 4816 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:4856: result: no
configure:4868: checking for main in -ldld
configure:4895: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -ldld -lnsl -ldl -lm
-lbsd >&5
/usr/bin/ld: cannot find -ldld
collect2: ld returned 1 exit status
configure:4898: $? = 1
configure: failed program was:
#line 4875 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:4915: result: no
configure:4927: checking for main in -lld
configure:4954: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lld -lnsl -ldl -lm
-lbsd >&5
/usr/bin/ld: cannot find -lld
collect2: ld returned 1 exit status
configure:4957: $? = 1
configure: failed program was:
#line 4934 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:4974: result: no
configure:4986: checking for main in -lcompat
configure:5013: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lcompat -lnsl -ldl
-lm -lbsd >&5
/usr/bin/ld: cannot find -lcompat
collect2: ld returned 1 exit status
configure:5016: $? = 1
configure: failed program was:
#line 4993 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:5033: result: no
configure:5045: checking for main in -lBSD
configure:5072: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lBSD -lnsl -ldl -lm
-lbsd >&5
/usr/bin/ld: cannot find -lBSD
collect2: ld returned 1 exit status
configure:5075: $? = 1
configure: failed program was:
#line 5052 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:5092: result: no
configure:5104: checking for main in -lgen
configure:5131: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lgen -lnsl -ldl -lm
-lbsd >&5
/usr/bin/ld: cannot find -lgen
collect2: ld returned 1 exit status
configure:5134: $? = 1
configure: failed program was:
#line 5111 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:5151: result: no
configure:5163: checking for main in -lPW
configure:5190: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lPW -lnsl -ldl -lm
-lbsd >&5
/usr/bin/ld: cannot find -lPW
collect2: ld returned 1 exit status
configure:5193: $? = 1
configure: failed program was:
#line 5170 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:5210: result: no
configure:5222: checking for main in -lresolv
configure:5249: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lresolv -lnsl -ldl
-lm -lbsd >&5
configure:5252: $? = 0
configure:5255: test -s conftest
configure:5258: $? = 0
configure:5269: result: yes
configure:5280: checking for library containing getopt_long
configure:5313: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lresolv -lnsl -ldl
-lm -lbsd >&5
configure:5316: $? = 0
configure:5319: test -s conftest
configure:5322: $? = 0
configure:5381: result: none required
configure:5390: checking for main in -lunix
configure:5417: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lunix -lresolv
-lnsl -ldl -lm -lbsd >&5
/usr/bin/ld: cannot find -lunix
collect2: ld returned 1 exit status
configure:5420: $? = 1
configure: failed program was:
#line 5397 "configure"
#include "confdefs.h"
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
main ();
;
return 0;
}
configure:5437: result: no
configure:5448: checking for library containing crypt
configure:5481: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lresolv -lnsl -ldl
-lm -lbsd >&5
/tmp/cc912vCe.o: In function `main':
/tmp/cc912vCe.o(.text+0x7): undefined reference to `crypt'
collect2: ld returned 1 exit status
configure:5484: $? = 1
configure: failed program was:
#line 5455 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char crypt ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
crypt ();
;
return 0;
}
configure:5527: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lcrypt -lresolv
-lnsl -ldl -lm -lbsd >&5
configure:5530: $? = 0
configure:5533: test -s conftest
configure:5536: $? = 0
configure:5549: result: -lcrypt
configure:5558: checking for __inet_ntoa in -lbind
configure:5591: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lbind -lcrypt
-lresolv -lnsl -ldl -lm -lbsd >&5
/usr/bin/ld: cannot find -lbind
collect2: ld returned 1 exit status
configure:5594: $? = 1
configure: failed program was:
#line 5565 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char __inet_ntoa ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
__inet_ntoa ();
;
return 0;
}
configure:5611: result: no
configure:5623: checking for library containing fdatasync
configure:5656: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lcrypt -lresolv
-lnsl -ldl -lm -lbsd >&5
configure:5659: $? = 0
configure:5662: test -s conftest
configure:5665: $? = 0
configure:5724: result: none required
configure:5733: checking for shmget in -lcygipc
configure:5766: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lcygipc -lcrypt
-lresolv -lnsl -ldl -lm -lbsd >&5
/usr/bin/ld: cannot find -lcygipc
collect2: ld returned 1 exit status
configure:5769: $? = 1
configure: failed program was:
#line 5740 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char shmget ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
shmget ();
;
return 0;
}
configure:5786: result: no
configure:5800: checking for readline
configure:5837: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lreadline -lcrypt
-lresolv -lnsl -ldl -lm -lbsd >&5
/usr/local/lib/libreadline.so: undefined reference to `tgetnum'
/usr/local/lib/libreadline.so: undefined reference to `tgoto'
/usr/local/lib/libreadline.so: undefined reference to `tgetflag'
/usr/local/lib/libreadline.so: undefined reference to `BC'
/usr/local/lib/libreadline.so: undefined reference to `tputs'
/usr/local/lib/libreadline.so: undefined reference to `PC'
/usr/local/lib/libreadline.so: undefined reference to `tgetent'
/usr/local/lib/libreadline.so: undefined reference to `UP'
/usr/local/lib/libreadline.so: undefined reference to `tgetstr'
collect2: ld returned 1 exit status
configure:5840: $? = 1
configure: failed program was:
#line 5811 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char readline ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
readline ();
;
return 0;
}
configure:5837: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -ledit -lcrypt
-lresolv -lnsl -ldl -lm -lbsd >&5
/usr/bin/ld: cannot find -ledit
collect2: ld returned 1 exit status
configure:5840: $? = 1
configure: failed program was:
#line 5811 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char readline ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
readline ();
;
return 0;
}
configure:5837: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lreadline -ltermcap
-lcrypt -lresolv -lnsl -ldl -lm -lbsd >&5
/usr/bin/ld: cannot find -ltermcap
collect2: ld returned 1 exit status
configure:5840: $? = 1
configure: failed program was:
#line 5811 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char readline ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
readline ();
;
return 0;
}
configure:5837: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -ledit -ltermcap
-lcrypt -lresolv -lnsl -ldl -lm -lbsd >&5
/usr/bin/ld: cannot find -ledit
collect2: ld returned 1 exit status
configure:5840: $? = 1
configure: failed program was:
#line 5811 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char readline ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
readline ();
;
return 0;
}
configure:5837: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lreadline -lncurses
-lcrypt -lresolv -lnsl -ldl -lm -lbsd >&5
/usr/bin/ld: cannot find -lncurses
collect2: ld returned 1 exit status
configure:5840: $? = 1
configure: failed program was:
#line 5811 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char readline ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
readline ();
;
return 0;
}
configure:5837: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -ledit -lncurses
-lcrypt -lresolv -lnsl -ldl -lm -lbsd >&5
/usr/bin/ld: cannot find -ledit
collect2: ld returned 1 exit status
configure:5840: $? = 1
configure: failed program was:
#line 5811 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char readline ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
readline ();
;
return 0;
}
configure:5837: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -lreadline -lcurses
-lcrypt -lresolv -lnsl -ldl -lm -lbsd >&5
/usr/bin/ld: cannot find -lcurses
collect2: ld returned 1 exit status
configure:5840: $? = 1
configure: failed program was:
#line 5811 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char readline ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
readline ();
;
return 0;
}
configure:5837: gcc -o conftest -O2 -I/usr/local/lib
-I/usr/local/include -L/usr/local/lib conftest.c -ledit -lcurses
-lcrypt -lresolv -lnsl -ldl -lm -lbsd >&5
/usr/bin/ld: cannot find -ledit
collect2: ld returned 1 exit status
configure:5840: $? = 1
configure: failed program was:
#line 5811 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
#ifdef __cplusplus
extern "C"
#endif
/* We use char because int might match the return type of a gcc2
builtin and then its argument prototype would still apply. */
char readline ();
#ifdef F77_DUMMY_MAIN
# ifdef __cplusplus
extern "C"
# endif
int F77_DUMMY_MAIN() { return 1; }
#endif
int
main ()
{
readline ();
;
return 0;
}
configure:5883: result: no
configure:5890: error: readline library not found
If you have readline already installed, see config.log for details on the
failure. It is possible the compiler isn't looking in the proper directory.
Use --without-readline to disable readline support.
## ---------------- ##
## Cache variables. ##
## ---------------- ##
ac_cv_build=i686-pc-linux-gnu
ac_cv_build_alias=i686-pc-linux-gnu
ac_cv_c_compiler_gnu=yes
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=
ac_cv_env_CFLAGS_value=
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_DOCBOOKSTYLE_set=
ac_cv_env_DOCBOOKSTYLE_value=
ac_cv_env_LDFLAGS_set=
ac_cv_env_LDFLAGS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_exeext=
ac_cv_host=i686-pc-linux-gnu
ac_cv_host_alias=i686-pc-linux-gnu
ac_cv_lib_BSD_main=no
ac_cv_lib_IPC_main=no
ac_cv_lib_PW_main=no
ac_cv_lib_bind___inet_ntoa=no
ac_cv_lib_bsd_main=yes
ac_cv_lib_compat_main=no
ac_cv_lib_cygipc_shmget=no
ac_cv_lib_dl_main=yes
ac_cv_lib_dld_main=no
ac_cv_lib_gen_main=no
ac_cv_lib_ipc_main=no
ac_cv_lib_lc_main=no
ac_cv_lib_ld_main=no
ac_cv_lib_m_main=yes
ac_cv_lib_nsl_main=yes
ac_cv_lib_resolv_main=yes
ac_cv_lib_socket_main=no
ac_cv_lib_unix_main=no
ac_cv_lib_util_setproctitle=no
ac_cv_objext=o
ac_cv_path_LD=/usr/bin/ld
ac_cv_path_PERL=/usr/bin/perl
ac_cv_path_TAR=/bin/tar
ac_cv_prog_AWK=gawk
ac_cv_prog_CPP='gcc -E'
ac_cv_prog_YACC='bison -y'
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_ac_ct_RANLIB=ranlib
ac_cv_prog_ac_ct_STRIP=strip
ac_cv_prog_cc_g=yes
ac_cv_prog_gnu_ld=yes
ac_cv_search_crypt=-lcrypt
ac_cv_search_fdatasync='none required'
ac_cv_search_getopt_long='none required'
pgac_cv_check_readline=no
pgac_cv_path_flex=/usr/local/bin/flex
## ----------- ##
## confdefs.h. ##
## ----------- ##
#define PACKAGE_NAME "PostgreSQL"
#define PACKAGE_TARNAME "postgresql"
#define PACKAGE_VERSION "7.3.3"
#define PACKAGE_STRING "PostgreSQL 7.3.3"
#define PACKAGE_BUGREPORT "pgsql-bugs@postgresql.org"
#define PG_VERSION "7.3.3"
#define DEF_PGPORT 5432
#define DEF_PGPORT_STR "5432"
#define DEF_MAXBACKENDS 32
#define PG_VERSION_STR "PostgreSQL 7.3.3 on i686-pc-linux-gnu, compiled
by GCC 2.96"
#define PG_KRB_SRVNAM "postgres"
#define USE_SSL 1
#define HAVE_LIBBSD 1
#define HAVE_LIBM 1
#define HAVE_LIBDL 1
#define HAVE_LIBNSL 1
#define HAVE_LIBRESOLV 1
configure: exit 1
John McGloughlin writes: > >> config.log (sorry for the BIG file ... wasn't sure if you wanted the > whole thing or not Looks like you need to install (or make available) the termcap library. -- Peter Eisentraut peter_e@gmx.net
John, The trick on my RedHat 7.3 system was to install the termcap-devel, readline-devel, and zlib-devel RPMs from the installationCDs. -dylan- > -----Original Message----- > From: John McGloughlin [mailto:johnmac@mcgloughlingroup.com] > Sent: Tuesday, June 17, 2003 21:03 > To: pgsql-admin@postgresql.org > Subject: [ADMIN] configure readline error > > > Hello, > > I'm having trouble with ./configure for Postgres 7.3.3 on a > RH7.3 i686 > system. > .... > checking for readline... no > readline library not found > if you have readline already installed ..... > > I've gone through config.log and it looks like it searches > the correct > locations. > > I have gnu readline 4.1 installed and can find libs in > /usr/local/lib/libreadline.a and headers in > /usr/local/lib/include/readline/*.h. > > I configured with ./configure > --with-includes=/usr/local/lib:/usr/local/lib/include/readline > --with-libraries=/usr/local/lib:/usr/local/lib/include/readline > --with-perl --with-openssl --with-syslog > > Unfortunately I keep getting the error. I've searched numerous lists, > groups, faqs, etc. but cannot seem to resolve the issue. Any > help would > be greatly appreciated. > > Thanx in advance! > > johnmac > > > > ---------------------------(end of > broadcast)--------------------------- > TIP 2: you can get off all lists at once with the unregister command > (send "unregister YourEmailAddressHere" to > majordomo@postgresql.org) >
That was it. ncurses-devel, termcap-devel, readline-devel fixed the problem. Thanx a bunch for all those that helped. johnmac Kuhn, Dylan K (4520500D) wrote: >John, > >The trick on my RedHat 7.3 system was to install the termcap-devel, readline-devel, and zlib-devel RPMs from the installationCDs. > >-dylan- > > > >>-----Original Message----- >>From: John McGloughlin [mailto:johnmac@mcgloughlingroup.com] >>Sent: Tuesday, June 17, 2003 21:03 >>To: pgsql-admin@postgresql.org >>Subject: [ADMIN] configure readline error >> >> >>Hello, >> >>I'm having trouble with ./configure for Postgres 7.3.3 on a >>RH7.3 i686 >>system. >>.... >>checking for readline... no >>readline library not found >>if you have readline already installed ..... >> >>I've gone through config.log and it looks like it searches >>the correct >>locations. >> >>I have gnu readline 4.1 installed and can find libs in >>/usr/local/lib/libreadline.a and headers in >>/usr/local/lib/include/readline/*.h. >> >>I configured with ./configure >>--with-includes=/usr/local/lib:/usr/local/lib/include/readline >>--with-libraries=/usr/local/lib:/usr/local/lib/include/readline >>--with-perl --with-openssl --with-syslog >> >>Unfortunately I keep getting the error. I've searched numerous lists, >>groups, faqs, etc. but cannot seem to resolve the issue. Any >>help would >>be greatly appreciated. >> >>Thanx in advance! >> >>johnmac >> >> >> >>---------------------------(end of >>broadcast)--------------------------- >>TIP 2: you can get off all lists at once with the unregister command >> (send "unregister YourEmailAddressHere" to >>majordomo@postgresql.org) >> >> >> > >---------------------------(end of broadcast)--------------------------- >TIP 5: Have you checked our extensive FAQ? > > http://www.postgresql.org/docs/faqs/FAQ.html > >