Обсуждение: pg_last_xact_insert_timestamp
On Thu, Sep 8, 2011 at 7:06 AM, Chris Redekop <chris@replicon.com> wrote: > Is there anything available to get the last time a transaction > occurred?....like say "pg_last_xact_timestamp"? In order to accurately > calculate how far behind my slave is I need to do something like > master::pg_last_xact_timestamp() - > slave::pg_last_xact_replay_timestamp()....currently I'm using now() instead > of the pg_last_xact_timestamp() call, but then when the master is not busy > the slave appears to lag behind. I'm considering writing a C module to get > the last modified file time of the xlog, but I'm hoping there is a better > alternative that I haven't found yet.... The above has been posted in pgsql-general. The reason why Chris thinks a counterpart of pg_last_xact_replay_timestamp() is required sounds reasonable to me. So I'd like to propose new function "pg_last_xact_insert_timestamp" as the counterpart, which returns the timestamp of the last inserted commit or abort WAL record. I'll add the attached patch into the next CF. Comments? Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center
Вложения
On Thu, Sep 8, 2011 at 9:36 AM, Fujii Masao <masao.fujii@gmail.com> wrote: > On Thu, Sep 8, 2011 at 7:06 AM, Chris Redekop <chris@replicon.com> wrote: >> Is there anything available to get the last time a transaction >> occurred?....like say "pg_last_xact_timestamp"? In order to accurately >> calculate how far behind my slave is I need to do something like >> master::pg_last_xact_timestamp() - >> slave::pg_last_xact_replay_timestamp()....currently I'm using now() instead >> of the pg_last_xact_timestamp() call, but then when the master is not busy >> the slave appears to lag behind. I'm considering writing a C module to get >> the last modified file time of the xlog, but I'm hoping there is a better >> alternative that I haven't found yet.... > > The above has been posted in pgsql-general. The reason why Chris thinks > a counterpart of pg_last_xact_replay_timestamp() is required sounds > reasonable to me. So I'd like to propose new function > "pg_last_xact_insert_timestamp" as the counterpart, which returns the > timestamp of the last inserted commit or abort WAL record. I'll add the > attached patch into the next CF. For reasons stated on the original thread, I don't think we need this. The OP can calculate what he wants without this. The code already exists in recovery and has some purpose there. Adding similar code to the mainline just so somebody can run this function occasionally is not good. Based on this I will be looking to see if we can optimise the recovery path some more. -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
On Thu, Sep 8, 2011 at 5:55 PM, Simon Riggs <simon@2ndquadrant.com> wrote: > On Thu, Sep 8, 2011 at 9:36 AM, Fujii Masao <masao.fujii@gmail.com> wrote: >> The above has been posted in pgsql-general. The reason why Chris thinks >> a counterpart of pg_last_xact_replay_timestamp() is required sounds >> reasonable to me. So I'd like to propose new function >> "pg_last_xact_insert_timestamp" as the counterpart, which returns the >> timestamp of the last inserted commit or abort WAL record. I'll add the >> attached patch into the next CF. > > For reasons stated on the original thread, I don't think we need this. > > The OP can calculate what he wants without this. > > The code already exists in recovery and has some purpose there. Adding > similar code to the mainline just so somebody can run this function > occasionally is not good. Based on this I will be looking to see if we > can optimise the recovery path some more. Okay. Let me explain another use case of pg_last_xact_insert_timestamp(). The existing functions might be enough for checking whether the standby has already caught up with the master. But I think that new function would be very useful to calculate *how much* the standby is behind from the master. Of course, we can do that by using the existing functions. But a problem is that they return LSN and the calculated delay is represented as the size of WAL. For users, it's not easy to handle LSN (e.g., there is no function to do calculation of LSN), and the delay in WAL size is not intuitive. I've sometimes received such a complaint. OTOH, new function enables users to monitor the delay as a timestamp. For users, a timestamp is obviously easier to handle than LSN, and the delay as a timestamp is more intuitive. So, I think that it's worth adding something like pg_last_xact_insert_timestamp into core for improvement of user-friendness. Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center
On Thu, Sep 8, 2011 at 6:14 AM, Fujii Masao <masao.fujii@gmail.com> wrote: > OTOH, new function enables users to monitor the delay as a timestamp. > For users, a timestamp is obviously easier to handle than LSN, and the delay > as a timestamp is more intuitive. So, I think that it's worth adding > something like pg_last_xact_insert_timestamp into core for improvement > of user-friendness. It seems very nice from a usability point of view, but I have to agree with Simon's concern about performance. Actually, as of today, WALInsertLock is such a gigantic bottleneck that I suspect the overhead of this additional bookkeeping would be completely unnoticeable. But I'm still reluctant to add more centralized spinlocks that everyone has to fight over, having recently put a lot of effort into getting rid of some of the ones we've traditionally had. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
Thanks for all the feedback guys. Just to throw another monkey wrench in here - I've been playing with Simon's proposed solution of returning 0 when the WAL positions match, and I've come to the realizatiion that even if using pg_last_xact_insert_timestamp, although it would help, we still wouldn't be able to get a 100% accurate "how far behind?" counter....not that this is a big deal, but I know my ops team is going to bitch to me about it :).....take this situation: there's a lull of 30 seconds where there are no transactions committed on the server....the slave is totally caught up, WAL positions match, I'm reporting 0, everything is happy. Then a transaction is committed on the master....before the slave gets it my query hits it and sees that we're 30 seconds behind (when in reality we're <1sec behind).....Because of this affect my graph is a little spikey...I mean it's not a huge deal or anything - I can put some sanity checking in my number reporting ("if 1 second ago you were 0 seconds behind, you can't be more than 1 second behind now" sorta thing). But if we wanted to go for super-ideal solution there would be a way to get the timestamp of pg_stat_replication.replay_location+1 (the first transaction that the slave does not have).
On Thu, Sep 8, 2011 at 7:03 AM, Robert Haas <robertmhaas@gmail.com> wrote:
On Thu, Sep 8, 2011 at 6:14 AM, Fujii Masao <masao.fujii@gmail.com> wrote:It seems very nice from a usability point of view, but I have to agree
> OTOH, new function enables users to monitor the delay as a timestamp.
> For users, a timestamp is obviously easier to handle than LSN, and the delay
> as a timestamp is more intuitive. So, I think that it's worth adding
> something like pg_last_xact_insert_timestamp into core for improvement
> of user-friendness.
with Simon's concern about performance. Actually, as of today,
WALInsertLock is such a gigantic bottleneck that I suspect the
overhead of this additional bookkeeping would be completely
unnoticeable. But I'm still reluctant to add more centralized
spinlocks that everyone has to fight over, having recently put a lot
of effort into getting rid of some of the ones we've traditionally
had.
--
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise PostgreSQL Company
On Thu, Sep 8, 2011 at 10:03 PM, Robert Haas <robertmhaas@gmail.com> wrote: > On Thu, Sep 8, 2011 at 6:14 AM, Fujii Masao <masao.fujii@gmail.com> wrote: >> OTOH, new function enables users to monitor the delay as a timestamp. >> For users, a timestamp is obviously easier to handle than LSN, and the delay >> as a timestamp is more intuitive. So, I think that it's worth adding >> something like pg_last_xact_insert_timestamp into core for improvement >> of user-friendness. > > It seems very nice from a usability point of view, but I have to agree > with Simon's concern about performance. Actually, as of today, > WALInsertLock is such a gigantic bottleneck that I suspect the > overhead of this additional bookkeeping would be completely > unnoticeable. The patch I've posted adds one acquisition and release of spinlock per a commit or abort. But it's done outside of WALInsertLock. So I don't think that the patch degrades a performance. > But I'm still reluctant to add more centralized > spinlocks that everyone has to fight over, having recently put a lot > of effort into getting rid of some of the ones we've traditionally > had. You are against adding new acquisition and release of spinlock itself even if it has nothing to do with WALInsertLock? The patch uses XLogCtl->info_lck spinlock to save the last insert timestamp in the shmem. XLogCtl->info_lck already protects many shmem variables related to XLOG. So using XLogCtl->info_lck additionally might make its contention heavier and degrade a performance. If the patch defines new spinlock and uses it to save the timestamp to avoid such a contention, you feel satisfied with the patch? Another idea to avoid spinlock contention is save the timestamp in PgBackendStatus (which contains information for pg_stat_activity). This enables us to write and read the timestamp without spinlock. Comments? Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center
On Thu, Sep 8, 2011 at 8:42 PM, Fujii Masao <masao.fujii@gmail.com> wrote: > Another idea to avoid spinlock contention is save the timestamp in > PgBackendStatus (which contains information for pg_stat_activity). > This enables us to write and read the timestamp without spinlock. > Comments? That seems like a possibly promising approach, in that each backend could update the information separately, and it's the reader's job to go find the maximum of all those values when needed. So the overhead is (properly, in this case) placed on the reader instead of the writer. But it's a bit tricky, because when the reader wants that maximum, it has to take into account inactive backends that may have committed transactions before exiting, not just the ones that are still connected. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On Sat, Sep 10, 2011 at 12:32 AM, Robert Haas <robertmhaas@gmail.com> wrote: > On Thu, Sep 8, 2011 at 8:42 PM, Fujii Masao <masao.fujii@gmail.com> wrote: >> Another idea to avoid spinlock contention is save the timestamp in >> PgBackendStatus (which contains information for pg_stat_activity). >> This enables us to write and read the timestamp without spinlock. >> Comments? > > That seems like a possibly promising approach, in that each backend > could update the information separately, and it's the reader's job to > go find the maximum of all those values when needed. So the overhead > is (properly, in this case) placed on the reader instead of the > writer. But it's a bit tricky, because when the reader wants that > maximum, it has to take into account inactive backends that may have > committed transactions before exiting, not just the ones that are > still connected. Yes, that's what I was thinking. The attached patch has adopted that approach. Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center
Вложения
Hi, This is a review for pg_last_xact_insert_timestamp patch. (https://commitfest.postgresql.org/action/patch_view?id=634) Summary ==================== There's one question and two comments. Q1: The shmem entry for timestamp is not initialized on allocating. Is this OK? (I don't know that for OSs other than Linux) And zeroing double field is OK for all OSs? And you can find the two more comment in "Code details" section. I have no objection for commiter review with the Q1 above is cleared. Purpose and function of this patch ==================== This patch allows users to grip the amount of replay lag on the standby by giving the timestamp of the WAL latestly inserted on the primary. Each backend writes the timestamp of the just inserted log record of commit/abort freely on PgBackendStatus, and the function pg_last_xact_insert_timestamp() gathers them for all backends including inactive ones and returns the latest one, or NULL when no timestamp is saved. Implemented in lockless way. Patch application, regression test ==================== This patch applies cleanly onto HEAD. make world completed successfully. make check passed. Style of the code and patch seems correct. Documentation ==================== It looks properly documented for new functions. Performance ==================== This patch writes one TimestampTz value on shmem per one WAL insertion for commit/abort with no lock, and collect the values for all backends on reading without any locks. I think the former gives virtually no penalty for performance of transactions, and the latter has no influence on other transactions thanks to the lockless implement. Code details ==================== == Shared memory initialization beentry->st_xact_end_timestamp is not initialized on backend startup. This is because the life time of the field is beyond that of backends. On the other hand, Linux man page says that newly created shared memory segment is zeroed, but I don't have information about other OSs. Nevertheless this is ok for all OSs, I don't know whether initializing TimestampTz(double, int64 is ok) field with 8 bytes zeros is OK or not, for all platforms. (It is ok for IEEE754-binary64). == Modification detection protocol in pgstat.c In pgstat_report_xact_end_timestamp, `beentry->st_changecount protocol' is used. It is for avoiding reading halfway-updated beentry as described in pgstat.h. Meanwhile, beentry->st_xact_end_timestamp is not read or (re-)initialized in pgstat.c and xlog.c reads only this field of whole beentry and st_changecount is not get cared here.. So I think at present it is needless to touch st_changecount here. Of cource the penalty is very close to nothing so it may be there for future use... == Code duplication in xact.c in xact.c, same lines inserted into the end of both IF and ELSE blocks. xact.c:1047> pgstat_report_xact_end_timestamp(xlrec.xact_time); xact.c:1073> pgstat_report_xact_end_timestamp(xlrec.xact_time); These two lines refer to xlrec.xact_time, both of which comes from xactStopTimestamp freezed at xact.c:986 xact.c:986> SetCurrentTransactionStopTimestamp(); xact.c:1008> xlrec.xact_time = xactStopTimestamp; xact.c:1051> xlrec.xact_time = xactStopTimestamp; I think it is better to move this line to just after this ELSE block using xactStopTimestamp instead of xlrec.xact_time. Please leave it as it is if you put more importance on the similarity with the code inserted into RecordTransactionAbort(). Conclusion ==================== With the issue of shmem zeroing on other OSs is cleard, I have no objection to commit this patch. Sincerely, -- Kyotaro Horiguchi NTT Open Source Software Center
On Wed, Sep 14, 2011 at 6:21 PM, Kyotaro HORIGUCHI <horiguchi.kyotaro@oss.ntt.co.jp> wrote: > Hi, This is a review for pg_last_xact_insert_timestamp patch. > (https://commitfest.postgresql.org/action/patch_view?id=634) Thanks for the review! > Q1: The shmem entry for timestamp is not initialized on > allocating. Is this OK? (I don't know that for OSs other than > Linux) And zeroing double field is OK for all OSs? CreateSharedBackendStatus() initializes that shmem entries by doing MemSet(BackendStatusArray, 0, size). You think this is not enough? > Nevertheless this is ok for all OSs, I don't know whether > initializing TimestampTz(double, int64 is ok) field with 8 bytes > zeros is OK or not, for all platforms. (It is ok for > IEEE754-binary64). Which code are you concerned about? > == Modification detection protocol in pgstat.c > > In pgstat_report_xact_end_timestamp, `beentry->st_changecount > protocol' is used. It is for avoiding reading halfway-updated > beentry as described in pgstat.h. Meanwhile, > beentry->st_xact_end_timestamp is not read or (re-)initialized in > pgstat.c and xlog.c reads only this field of whole beentry and > st_changecount is not get cared here.. No, st_changecount is used to read st_xact_end_timestamp. st_xact_end_timestamp is read from the shmem to the local memory in pgstat_read_current_status(), and this function always checks st_changecount when reading the shmem value. > == Code duplication in xact.c > > in xact.c, same lines inserted into the end of both IF and ELSE > blocks. > > xact.c:1047> pgstat_report_xact_end_timestamp(xlrec.xact_time); > xact.c:1073> pgstat_report_xact_end_timestamp(xlrec.xact_time); > > These two lines refer to xlrec.xact_time, both of which comes > from xactStopTimestamp freezed at xact.c:986 > > xact.c:986> SetCurrentTransactionStopTimestamp(); > xact.c:1008> xlrec.xact_time = xactStopTimestamp; > xact.c:1051> xlrec.xact_time = xactStopTimestamp; > > I think it is better to move this line to just after this ELSE > block using xactStopTimestamp instead of xlrec.xact_time. Okay, I've changed the patch in that way. Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center
Вложения
On Thu, Sep 15, 2011 at 4:52 AM, Fujii Masao <masao.fujii@gmail.com> wrote: > Thanks for the review! Koyotaro Horiguchi - Are you going to re-review the latest version of this patch? Thanks, -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
Sorry for late to re-review.
One question is remaind,
> > Q1: The shmem entry for timestamp is not initialized on
> > allocating. Is this OK? (I don't know that for OSs other than
> > Linux) And zeroing double field is OK for all OSs?
>
> CreateSharedBackendStatus() initializes that shmem entries by doing
> MemSet(BackendStatusArray, 0, size). You think this is not enough?
Sorry for missing it. That's enough.
> > Nevertheless this is ok for all OSs, I don't know whether
> > initializing TimestampTz(double, int64 is ok) field with 8 bytes
> > zeros is OK or not, for all platforms. (It is ok for
> > IEEE754-binary64).
>
> Which code are you concerned about?
xlog.c: 5889
> beentry = pgstat_fetch_all_beentry();
>
> for (i = 0; i < MaxBackends; i++, beentry++)
> {
> xtime = beentry->st_xact_end_timestamp;
I think the last line in quoted code above reads possibly
zero-initialized double (or int64) value, then the doubted will
be compared and copied to another double.
> if (result < xtime)
> result = xtime;
>
> No, st_changecount is used to read st_xact_end_timestamp.
> st_xact_end_timestamp is read from the shmem to the local memory
> in pgstat_read_current_status(), and this function always checks
> st_changecount when reading the shmem value.
Yes, I confirmed that pg_lats_xact_insert_timestamp looks local
copy of BackendStatus. I've found it not unnecessary.
--
Kyotaro Horiguchi
NTT Open Source Software Center
On Thu, Sep 29, 2011 at 5:20 PM, Kyotaro HORIGUCHI
<horiguchi.kyotaro@oss.ntt.co.jp> wrote:
> Sorry for late to re-review.
Thanks!
>> > Nevertheless this is ok for all OSs, I don't know whether
>> > initializing TimestampTz(double, int64 is ok) field with 8 bytes
>> > zeros is OK or not, for all platforms. (It is ok for
>> > IEEE754-binary64).
>>
>> Which code are you concerned about?
>
> xlog.c: 5889
>> beentry = pgstat_fetch_all_beentry();
>>
>> for (i = 0; i < MaxBackends; i++, beentry++)
>> {
>> xtime = beentry->st_xact_end_timestamp;
>
> I think the last line in quoted code above reads possibly
> zero-initialized double (or int64) value, then the doubted will
> be compared and copied to another double.
>
>> if (result < xtime)
>> result = xtime;
I believe it's safe. Such a code is placed elsewhere in the source, too.
If it's unsafe, we should have received lots of bug reports related
to that. But we've not.
Regards,
--
Fujii Masao
NIPPON TELEGRAPH AND TELEPHONE CORPORATION
NTT Open Source Software Center
Hello, I understand that it has been at least practically no problem. Ok, I send this patch to comitters. Thanks for your dealing with nuisance questions. At Thu, 29 Sep 2011 21:21:32 +0900, Fujii Masao <masao.fujii@gmail.com> wrote in <CAHGQGwG0C21F0CZY5ExX-49dxdx7hJuNeiBBJ0Tzvh+7vMXWgw@mail.gmail.com> > >> > Nevertheless this is ok for all OSs, I don't know whether > >> > initializing TimestampTz(double, int64 is ok) field with 8 bytes ... > I believe it's safe. Such a code is placed elsewhere in the source, too. > If it's unsafe, we should have received lots of bug reports related > to that. But we've not. Regards, -- Kyotaro Horiguchi NTT Open Source Software Center
On Fri, Sep 30, 2011 at 3:24 AM, Kyotaro HORIGUCHI <horiguchi.kyotaro@oss.ntt.co.jp> wrote: > Ok, I send this patch to comitters. I repeat my objection to this patch. I'm very sorry I haven't been around much in last few weeks to keep up a dialogue about this and to make it clear how wrong I think this is. Adding something onto the main path of transaction commit is not good, especially when the only purpose of it is to run an occasional monitoring query for those people that use replication. Not everybody uses replication and even people that do use it don't need to run it so frequently that every single commit needs this. This is just bloat that we do not need and can also easily avoid. The calculation itself would be problematic since it differs from the way standby_delay is calculated on the standby, which will cause much confusion. Some thought or comment should be made about that also. If we want to measure times, we can easily send regular messages into WAL to provide this function. Using checkpoint records would seem frequent enough to me. We don't always send checkpoint records but we can send an info message instead if we are streaming. If archive_timeout is not set and max_wal_senders > 0 then we can send an info WAL message with timestamp on a regular cycle. Alternatively, we can send regular special messages from WALSender to WALReceiver that do not form part of the WAL stream, so we don't bulk up WAL archives. (i.e. don't use "w" messages). That seems like the most viable approach to this problem. -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
On Fri, Sep 30, 2011 at 3:18 AM, Simon Riggs <simon@2ndquadrant.com> wrote: > On Fri, Sep 30, 2011 at 3:24 AM, Kyotaro HORIGUCHI > <horiguchi.kyotaro@oss.ntt.co.jp> wrote: > >> Ok, I send this patch to comitters. > > I repeat my objection to this patch. I'm very sorry I haven't been > around much in last few weeks to keep up a dialogue about this and to > make it clear how wrong I think this is. > > Adding something onto the main path of transaction commit is not good, > especially when the only purpose of it is to run an occasional > monitoring query for those people that use replication. Not everybody > uses replication and even people that do use it don't need to run it > so frequently that every single commit needs this. This is just bloat > that we do not need and can also easily avoid. I think the overhead of this is so completely trivial that we shouldn't be concerned about it. It's writing 12 bytes to shared memory for each commit, without taking a lock, in a cache line that should be minimally contended. We write plenty of other data to shared memory on each commit, and that's nowhere close to being the expensive part of committing a transaction. What's expensive is fighting over WALInsertLock and ProcArrayLock and CLogControlLock, and possibly waiting for the commit to be durably flushed to disk, and maybe (at the margin) wrenching the cache lines in our PGPROC away from whatever processor last stole them to do GetSnapshotData(). I don't think that a couple of stores to uncontended shared memory are going to make any difference. > The calculation itself would be problematic since it differs from the > way standby_delay is calculated on the standby, which will cause much > confusion. Some thought or comment should be made about that also. The string standby_delay doesn't appear in our source tree anywhere, so I'm not sure what this is referring to. In any case, I'm in favor of this feature. Currently, the only way to measure the lag on the standby is to measure it in WAL bytes - and you get to write your own script to parse the WAL positions. This will allow people to measure it in minutes. That seems like a significant usability improvement. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On Fri, Sep 30, 2011 at 8:11 PM, Robert Haas <robertmhaas@gmail.com> wrote: > On Fri, Sep 30, 2011 at 3:18 AM, Simon Riggs <simon@2ndquadrant.com> wrote: >> On Fri, Sep 30, 2011 at 3:24 AM, Kyotaro HORIGUCHI >> <horiguchi.kyotaro@oss.ntt.co.jp> wrote: >> >>> Ok, I send this patch to comitters. >> >> I repeat my objection to this patch. I'm very sorry I haven't been >> around much in last few weeks to keep up a dialogue about this and to >> make it clear how wrong I think this is. >> >> Adding something onto the main path of transaction commit is not good, >> especially when the only purpose of it is to run an occasional >> monitoring query for those people that use replication. Not everybody >> uses replication and even people that do use it don't need to run it >> so frequently that every single commit needs this. This is just bloat >> that we do not need and can also easily avoid. > > I think the overhead of this is so completely trivial that we > shouldn't be concerned about it. It's writing 12 bytes to shared > memory for each commit, without taking a lock, in a cache line that > should be minimally contended. We write plenty of other data to > shared memory on each commit, and that's nowhere close to being the > expensive part of committing a transaction. What's expensive is > fighting over WALInsertLock and ProcArrayLock and CLogControlLock, and > possibly waiting for the commit to be durably flushed to disk, and > maybe (at the margin) wrenching the cache lines in our PGPROC away > from whatever processor last stole them to do GetSnapshotData(). I > don't think that a couple of stores to uncontended shared memory are > going to make any difference. If the feature could not be done another way, easily, I might agree. The point is it isn't necessary, useful or elegant to do it this way and *any* cycles added to mainline transactions need to have careful justification. And there really isn't any justification for doing things this way other than its the first way somebody thought of. -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
On Fri, Sep 30, 2011 at 3:22 PM, Simon Riggs <simon@2ndquadrant.com> wrote: > If the feature could not be done another way, easily, I might agree. I don't see that you've offered a reasonable alternative. The alternative proposals that you proposed don't appear to me to be solving the same problem. AIUI, the requested feature is to be able to get, on the master, the timestamp of the last commit or abort, just as we can already get the timestamp of the last commit or abort replayed on the standby. Nothing you WAL log and no messages you send to the standby are going to accomplish that goal. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On Fri, Sep 30, 2011 at 8:57 PM, Robert Haas <robertmhaas@gmail.com> wrote: > On Fri, Sep 30, 2011 at 3:22 PM, Simon Riggs <simon@2ndquadrant.com> wrote: >> If the feature could not be done another way, easily, I might agree. > > I don't see that you've offered a reasonable alternative. The > alternative proposals that you proposed don't appear to me to be > solving the same problem. AIUI, the requested feature is to be able > to get, on the master, the timestamp of the last commit or abort, just > as we can already get the timestamp of the last commit or abort > replayed on the standby. Nothing you WAL log and no messages you send > to the standby are going to accomplish that goal. The goal of the OP was to find out the replication delay. This function was suggested, but its not the only way. My alternative proposals solve the original problem in a better way. -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
On Fri, Sep 30, 2011 at 4:07 PM, Simon Riggs <simon@2ndquadrant.com> wrote: > On Fri, Sep 30, 2011 at 8:57 PM, Robert Haas <robertmhaas@gmail.com> wrote: >> On Fri, Sep 30, 2011 at 3:22 PM, Simon Riggs <simon@2ndquadrant.com> wrote: >>> If the feature could not be done another way, easily, I might agree. >> >> I don't see that you've offered a reasonable alternative. The >> alternative proposals that you proposed don't appear to me to be >> solving the same problem. AIUI, the requested feature is to be able >> to get, on the master, the timestamp of the last commit or abort, just >> as we can already get the timestamp of the last commit or abort >> replayed on the standby. Nothing you WAL log and no messages you send >> to the standby are going to accomplish that goal. > > The goal of the OP was to find out the replication delay. This > function was suggested, but its not the only way. > > My alternative proposals solve the original problem in a better way. As far as I can see, they don't solve the problem at all. Your proposals involve sending additional information from the master to the slave, but the slave already knows both its WAL position and the timestamp of the transaction it has most recently replayed, because the startup process on the slave tracks that information and publishes it in shared memory. On the master, however, only the WAL position is centrally tracked; the transaction timestamps are not. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On Thu, Sep 15, 2011 at 4:52 AM, Fujii Masao <masao.fujii@gmail.com> wrote: > Okay, I've changed the patch in that way. It occurs to me that pgstat_report_xact_end_timestamp doesn't really need to follow the protocol of bumping the change count before and after bumping the timestamp. We elsewhere assume that four-byte reads and writes are atomic, so there's no harm in assuming the same thing here (and if they're not... then the change-count thing is pretty dubious anyway). I think it's sufficient to just set the value, full stop. Also, in pg_last_xact_insert_timestamp, the errhint() seems a little strange - this is not exactly a WAL *control* function, is it? In the documentation, for the short description of pg_last_xact_insert_timestamp(), how about something like "returns the time at which a transaction commit or transaction about record was last inserted into the transaction log"? Or maybe that's too long. But the current description doesn't seem to do much other than recapitulate the function name, so I'm wondering if we can do any better than that. I think that instead of hacking up the backend-status copying code to have a mode where it copies everything, you should just have a special-purpose function that computes the value you need directly off the backend status entries themselves. This approach seems like it both clutters the code and adds lots of extra data copying. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On Sun, Oct 2, 2011 at 12:10 PM, Robert Haas <robertmhaas@gmail.com> wrote: > On Fri, Sep 30, 2011 at 4:07 PM, Simon Riggs <simon@2ndquadrant.com> wrote: >> On Fri, Sep 30, 2011 at 8:57 PM, Robert Haas <robertmhaas@gmail.com> wrote: >>> On Fri, Sep 30, 2011 at 3:22 PM, Simon Riggs <simon@2ndquadrant.com> wrote: >>>> If the feature could not be done another way, easily, I might agree. >>> >>> I don't see that you've offered a reasonable alternative. The >>> alternative proposals that you proposed don't appear to me to be >>> solving the same problem. AIUI, the requested feature is to be able >>> to get, on the master, the timestamp of the last commit or abort, just >>> as we can already get the timestamp of the last commit or abort >>> replayed on the standby. Nothing you WAL log and no messages you send >>> to the standby are going to accomplish that goal. >> >> The goal of the OP was to find out the replication delay. This >> function was suggested, but its not the only way. >> >> My alternative proposals solve the original problem in a better way. > > As far as I can see, they don't solve the problem at all. Your > proposals involve sending additional information from the master to > the slave, but the slave already knows both its WAL position and the > timestamp of the transaction it has most recently replayed, because > the startup process on the slave tracks that information and publishes > it in shared memory. On the master, however, only the WAL position is > centrally tracked; the transaction timestamps are not. The problem is to find the replication delay, even when the system is quiet. What I have proposed finds the replication delay more accurately even than looking at the last commit, since often there are writes but no commits. If we focus on the problem, rather than the first suggested solution to that problem, we'll come out on top. -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
Robert Haas <robertmhaas@gmail.com> writes:
> It occurs to me that pgstat_report_xact_end_timestamp doesn't really
> need to follow the protocol of bumping the change count before and
> after bumping the timestamp. We elsewhere assume that four-byte reads
> and writes are atomic, so there's no harm in assuming the same thing
> here (and if they're not... then the change-count thing is pretty
> dubious anyway). I think it's sufficient to just set the value, full
> stop.
I agree you can read the value without that, but I think that setting
it should still bump the change count. Otherwise there's no way for
another process to collect the whole struct and be sure that it's
self-consistent. We may not have a critical need for that right now,
but it's silly to foreclose the possibility to save a cycle or so.
regards, tom lane
On Sun, Oct 2, 2011 at 8:19 PM, Robert Haas <robertmhaas@gmail.com> wrote: > It occurs to me that pgstat_report_xact_end_timestamp doesn't really > need to follow the protocol of bumping the change count before and > after bumping the timestamp. We elsewhere assume that four-byte reads > and writes are atomic, so there's no harm in assuming the same thing > here (and if they're not... then the change-count thing is pretty > dubious anyway). I think it's sufficient to just set the value, full > stop. I agree with Tom here. It seems to be safer to follow the protocol even if that's not required for now. > Also, in pg_last_xact_insert_timestamp, the errhint() seems a little > strange - this is not exactly a WAL *control* function, is it? Not only "control" but also "WAL" might be confusing. What about "transaction information functions"? BTW, pg_current_xlog_location() and pg_current_xlog_insert_location() use the same HINT message as I used for pg_last_xact_insert_timestamp(), but they are also not WAL *control* function. And, in the document, they are categorized as "Backup Control Functions", but which sounds also strange. We should call them "WAL information functions" in both HINT message and the document? > In the documentation, for the short description of > pg_last_xact_insert_timestamp(), how about something like "returns the > time at which a transaction commit or transaction about record was > last inserted into the transaction log"? Or maybe that's too long. > But the current description doesn't seem to do much other than > recapitulate the function name, so I'm wondering if we can do any > better than that. Agreed. I will change the description per your suggestion. > I think that instead of hacking up the backend-status copying code to > have a mode where it copies everything, you should just have a > special-purpose function that computes the value you need directly off > the backend status entries themselves. This approach seems like it > both clutters the code and adds lots of extra data copying. Agreed. Will change. Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center
On Fri, Sep 30, 2011 at 4:18 PM, Simon Riggs <simon@2ndquadrant.com> wrote: > If we want to measure times, we can easily send regular messages into > WAL to provide this function. Using checkpoint records would seem > frequent enough to me. We don't always send checkpoint records but we > can send an info message instead if we are streaming. If > archive_timeout is not set and max_wal_senders > 0 then we can send an > info WAL message with timestamp on a regular cycle. What timestamp are you thinking the walsender should send? What we need is the timestamp which is comparable with the result of pg_last_xact_replay_timestamp() which returns the timestamp of the transaction commit or abort record. So, even if we adopt your proposal, ISTM that we still need to collect the timestamp for each commit. No? Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center
On Sun, Oct 2, 2011 at 8:21 AM, Simon Riggs <simon@2ndquadrant.com> wrote: > The problem is to find the replication delay, even when the system is quiet. > > What I have proposed finds the replication delay more accurately even > than looking at the last commit, since often there are writes but no > commits. > > If we focus on the problem, rather than the first suggested solution > to that problem, we'll come out on top. Sorry, but I still don't really think it's fair to say that you've proposed a solution to this problem. Or if you have, neither I nor Fujii Masao understand that proposal well enough to decide whether we like it. You said "maybe we could WAL log something once per checkpoint cycle" or "maybe we could add a new protocol message". We've both replied with various emails saying "we don't understand how that would solve the problem". If you want to add some detail to your proposal, then we can weigh the pros and cons as compared with what the patch does - but right now all you've provided is a theory that there might be a better solution to this problem out there, not any details about how it would work. Or if you have, then please post a link to the message where those details are written out, because I cannot find them on the thread. I do, however, agree that that the case where the system is quiet is the problem case for computing replication delay. It seems to me that, even without this patch, if the system has a continuous stream of commits, you can easily find the replication delay by differencing the current time on the master with the value returned by pg_last_xact_replay_timestamp(). However, if the master goes quiet, then the slave will appear to be progressively farther behind. With the addition of this patch, that problem goes away: you can now difference the return value of pg_last_xact_insert_timestamp() on the master with the return value of pg_last_xact_replay_timestamp() on the slave. If the master goes quiet, then pg_last_xact_insert_timestamp() will stop advancing, and so the two values you are comparing will be equal once the slave has caught up, and remain equal until activity resumes on the master. Now, there is a more subtle remaining problem, which is that when activity *does* resume on the master, there will be a (probably quite short) window of time during which the slave will have a much earlier timestamp than the one on the master. When the master has a commit after a long idle period but the slave has not yet replayed the commit record, the replication delay will appear to be equal to the length of the idle period. But that doesn't seem like a sufficient reason to reject the whole approach, because there are several ways around it. First, you could simply decide that the large computed lag value, although counterintuitive, is accurate under some definition, because, well, that really is the lag between the last transaction committed on the master and the last transaction committed on the standby, and if you don't like the fact that timestamps behave that way, you should compare using WAL positions instead. If you don't like that approach, then a second, also viable approach is to teach your monitoring software that the replication delay can never increase faster than the rate at which clock time is passing. So if you were caught up a minute ago, then you can't be more than a minute behind now. Another point I want to make here is that there's probably more than one useful definition of replication delay. The previous question presupposes that you're trying to answer the question "if I have a transaction that committed N seconds ago on the master, will it be visible on the standby?". It's also a reasonable time-based substitute for measuring the difference in master and standby WAL positions, although certainly it's going to work better if the rate of WAL generation is relatively even. But for a lot of people, it may be that what they really want to know is "what is the expected time for the standby to replay all generated but not yet applied WAL?" - or maybe some third thing that I'm not thinking of - and this function won't provide that. I think we can ultimately afford to provide more than one mechanism here, so I don't see doing this as foreclosing any other also-useful calculation that someone may wish to add in the future. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On Mon, Oct 3, 2011 at 8:07 PM, Robert Haas <robertmhaas@gmail.com> wrote: > Sorry, but I still don't really think it's fair to say that you've > proposed a solution to this problem. Or if you have, neither I nor > Fujii Masao understand that proposal well enough to decide whether we > like it. Arguing between trenches doesn't really get us anywhere. As ever, when someone claims to have a better solution then it is up to them to prove that is the case. -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
On Mon, Oct 3, 2011 at 4:25 PM, Simon Riggs <simon@2ndquadrant.com> wrote: > On Mon, Oct 3, 2011 at 8:07 PM, Robert Haas <robertmhaas@gmail.com> wrote: > >> Sorry, but I still don't really think it's fair to say that you've >> proposed a solution to this problem. Or if you have, neither I nor >> Fujii Masao understand that proposal well enough to decide whether we >> like it. > > Arguing between trenches doesn't really get us anywhere. > > As ever, when someone claims to have a better solution then it is up > to them to prove that is the case. So... are you going to do that? -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On Mon, Oct 3, 2011 at 6:31 PM, Fujii Masao <masao.fujii@gmail.com> wrote:
>> Also, in pg_last_xact_insert_timestamp, the errhint() seems a little
>> strange - this is not exactly a WAL *control* function, is it?
>
> Not only "control" but also "WAL" might be confusing. What about
> "transaction information functions"?
Attached is the updated version of the patch. In the patch, I used the
function name itself in the HINT message, i.e., the HINT message is
the following.
pg_last_xact_insert_timestamp() cannot be executed during recovery.
>> In the documentation, for the short description of
>> pg_last_xact_insert_timestamp(), how about something like "returns the
>> time at which a transaction commit or transaction about record was
>> last inserted into the transaction log"? Or maybe that's too long.
>> But the current description doesn't seem to do much other than
>> recapitulate the function name, so I'm wondering if we can do any
>> better than that.
>
> Agreed. I will change the description per your suggestion.
Done.
>> I think that instead of hacking up the backend-status copying code to
>> have a mode where it copies everything, you should just have a
>> special-purpose function that computes the value you need directly off
>> the backend status entries themselves. This approach seems like it
>> both clutters the code and adds lots of extra data copying.
>
> Agreed. Will change.
Done.
Regards,
--
Fujii Masao
NIPPON TELEGRAPH AND TELEPHONE CORPORATION
NTT Open Source Software Center
Вложения
On Tue, Oct 4, 2011 at 5:33 AM, Robert Haas <robertmhaas@gmail.com> wrote: > On Mon, Oct 3, 2011 at 4:25 PM, Simon Riggs <simon@2ndquadrant.com> wrote: >> On Mon, Oct 3, 2011 at 8:07 PM, Robert Haas <robertmhaas@gmail.com> wrote: >> >>> Sorry, but I still don't really think it's fair to say that you've >>> proposed a solution to this problem. Or if you have, neither I nor >>> Fujii Masao understand that proposal well enough to decide whether we >>> like it. >> >> Arguing between trenches doesn't really get us anywhere. >> >> As ever, when someone claims to have a better solution then it is up >> to them to prove that is the case. > > So... are you going to do that? Simon, could you? If your proposal turns out to be better than mine, I'd be happy to agree to drop my patch and adopt yours. Regards, -- Fujii Masao NIPPON TELEGRAPH AND TELEPHONE CORPORATION NTT Open Source Software Center
On Tue, Oct 4, 2011 at 1:05 PM, Fujii Masao <masao.fujii@gmail.com> wrote: > On Tue, Oct 4, 2011 at 5:33 AM, Robert Haas <robertmhaas@gmail.com> wrote: >> On Mon, Oct 3, 2011 at 4:25 PM, Simon Riggs <simon@2ndquadrant.com> wrote: >>> On Mon, Oct 3, 2011 at 8:07 PM, Robert Haas <robertmhaas@gmail.com> wrote: >>> >>>> Sorry, but I still don't really think it's fair to say that you've >>>> proposed a solution to this problem. Or if you have, neither I nor >>>> Fujii Masao understand that proposal well enough to decide whether we >>>> like it. >>> >>> Arguing between trenches doesn't really get us anywhere. >>> >>> As ever, when someone claims to have a better solution then it is up >>> to them to prove that is the case. >> >> So... are you going to do that? > > Simon, could you? If your proposal turns out to be better than mine, I'd be > happy to agree to drop my patch and adopt yours. Yes, will do. -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
On Tue, Oct 4, 2011 at 9:15 AM, Simon Riggs <simon@2ndquadrant.com> wrote: >> Simon, could you? If your proposal turns out to be better than mine, I'd be >> happy to agree to drop my patch and adopt yours. > > Yes, will do. Simon, I believe that we are still waiting for this. Thanks, -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On Thu, Oct 13, 2011 at 14:25, Robert Haas <robertmhaas@gmail.com> wrote: > On Tue, Oct 4, 2011 at 9:15 AM, Simon Riggs <simon@2ndquadrant.com> wrote: >>> Simon, could you? If your proposal turns out to be better than mine, I'd be >>> happy to agree to drop my patch and adopt yours. >> >> Yes, will do. > > Simon, > > I believe that we are still waiting for this. Are we going to hear anything back on this one for the current CF? If not, I suggest we go with Fujiis version for now - we can always change it for a potentially better version later. -- Magnus Hagander Me: http://www.hagander.net/ Work: http://www.redpill-linpro.com/
On 10/02/2011 07:10 AM, Robert Haas wrote: > Your proposals involve sending additional information from the master to > the slave, but the slave already knows both its WAL position and the > timestamp of the transaction it has most recently replayed, because > the startup process on the slave tracks that information and publishes > it in shared memory. On the master, however, only the WAL position is > centrally tracked; the transaction timestamps are not. > This seems to be the question that was never really answered well enough to satisfy anyone, so let's rewind to here for a bit. I wasn't following this closely until now, so I just did my own review from scratch against the latest patch. I found a few issues, and I don't think all of them have been vented here yet: -It adds overhead at every commit, even for people who aren't using it. Probably not enough to matter, but it's yet another thing going through the often maligned as too heavy pgstat system, often. -In order to measure lag this way, you need access to both the master and the standby. Yuck, dblink or application code doing timestamp math, either idea makes me shudder. It would be nice to answer "how many seconds of lag do have?" directly from the standby. Ideally I would like both the master and standby to know those numbers. -After the server is restarted, you get a hole in the monitoring data until the first transaction is committed or aborted. The way the existing pg_last_xact_replay_timestamp side of this computation goes NULL for some unpredictable period after restart is going to drive monitoring systems batty. Building this new facility similarly will force everyone who writes a lag monitor to special case for that condition on both sides. Sure, that's less user hostile than the status quo, but it isn't going to help PostgreSQL's battered reputation in the area of monitoring either. -The transaction ID advancing is not a very good proxy for real-world lag. You can have a very large amount of writing in between commits. The existing lag monitoring possibilities focus on WAL position instead, which is better correlated with the sort of activity that causes lag. Making one measurement of lag WAL position based (the existing ones) and another based on transaction advance (this proposal) is bound to raise some "which of these is the correct lag?" questions, when the two diverge. Large data loading operations come to mind as a not unusual at all situation where this would happen. I'm normally a fan of building the simplest thing that will do something useful, and this patch succeeds there. But the best data to collect needs to have a timestamp that keeps moving forward in a way that correlates reasonably well to the system WAL load. Using the transaction ID doesn't do that. Simon did some hand waving around sending a timestamp every checkpoint. That would allow the standby to compute its own lag, limit overhead to something much lighter than per-transaction, and better track write volume. There could still be a bigger than normal discontinuity after server restart, if the server was down a while, but at least there wouldn't ever be a point where the value was returned by the master but was NULL. But as Simon mentioned in passing, it will bloat the WAL streams for everyone. Here's the as yet uncoded mini-proposal that seems to have slid by uncommented upon: "We can send regular special messages from WALSender to WALReceiver that do not form part of the WAL stream, so we don't bulk up WAL archives. (i.e. don't use "w" messages)." Here's my understanding of how this would work. Each time a commit/abort record appears in the WAL, that updates XLogCtl with the associated timestamp. If WALReceiver received regular updates containing the master's clock timestamp and stored them similarly--either via regular streaming or the heartbeat--it could compute lag with the same resolution as this patch aims to do, for the price of two spinlocks: just subtract the two timestamps. No overhead on the master, and lag can be directly computed and queried from each standby. If you want to feed that data back to the master so it can appear in pg_stat_replication in both places, send it periodically via the same channel sync rep and standby feedback use. I believe that will be cheap in many cases, since it can piggyback on messages that will still be quite small relative to minimum packet size on most networks. (Exception for compressed/encrypted networks where packets aren't discrete in this way doesn't seem that relevant, presuming that if you're doing one of those I would think this overhead is the least of your worries) Now, there's still one problem here. This doesn't address the "lots of write volume but no commit" problem any better than the proposed patch does. Maybe there's some fancy way to inject it along with the received WAL on the standby, I'm out of brain power to think through that right now. One way to force this to go away is to add a "time update" WAL record type here, one that only appears in some of these unusual situations. My first idea for keeping that overhead small is to put the injection logic for it at WAL file switch time. If you haven't committed a transaction during that entire 16MB of writes, start the new WAL segment with a little time update record. That would ensure you never do too many writes before the WAL replay clock is updated, while avoiding this record type altogether during commit-heavy periods. The WAL sender and receiver pair should be able to work out how to handle the other corner case, where neither WAL advance nor transactions occured. You don't want lag to keep increasing forever there. If the transaction ID hasn't moved forward, the heartbeat can still update the time. I think if you do that, all you'd need to special case is that if master XID=standby replay XID, lag time should be forced to 0 instead of being its usual value (master timestamp - last standby commit/abort record). As for "what do you return if asked for lag before the first data with a timestamp appears?" problem, there are surely still cases where that happens in this approach. I'm less concerned about that if there's only a single function involved though. The part that worries me is the high probability people are going to do NULL math wrong if they have to combine two values from different servers, and not catch it during development. If I had a penny for every NULL handling mistake ever made in that category, I'd be writing this from my island lair instead of Baltimore. I'm more comfortable saying "this lag interval might be NULL"; if that's the only exception people have to worry about, that doesn't stress me as much. Last disclaimer: if this argument is persuasive enough to punt pg_last_xact_insert_timestamp for now, in favor of a new specification along the lines I've outlined here, I have no intention of letting myself or Simon end up blocking progress on that. This one is important enough for 9.2 that if there's not another patch offering the same feature sitting in the queue by the end of the month, I'll ask someone else here to sit on this problem a while. Probably Jaime, because he's suffering with this problem as much as I am. We maintain code in repmgr to do this job with brute force: it saves a history table to translate XID->timestamps and works out lag from there. Window function query + constantly churning monitoring table=high overhead. It would really be great to EOL that whole messy section as deprecated starting in 9.2. -- Greg Smith 2ndQuadrant US greg@2ndQuadrant.com Baltimore, MD PostgreSQL Training, Services, and 24x7 Support www.2ndQuadrant.us
On Sat, Dec 10, 2011 at 12:29 PM, Greg Smith <greg@2ndquadrant.com> wrote: > "We can send regular special messages from WALSender to WALReceiver that do > not form part of the WAL stream, so we don't bulk > up WAL archives. (i.e. don't use "w" messages)." > > Here's my understanding of how this would work. Let me explain a little more and provide a very partial patch. We define a new replication protocol message 'k' which sends a keepalive from primary to standby when there is no WAL to send. The message does not form part of the WAL stream so does not bloat WAL files, nor cause them to fill when unattended. Keepalives contain current end of WAL and a current timestamp. Keepalive processing is all done on the standby and there is no overhead on a primary which does not use replication. There is a slight overhead on primary for keepalives but this happens only when there are no writes. On the standby we already update shared state when we receive some data, so not much else to do there. When the standby has applied up to the end of WAL the replication delay is receipt time - send time of keepalive. When standby receives a data packet it records WAL ptr and time. As standby applies each chunk it removes the record for each data packet and sets the last applied timestamp. If standby falls behind the number of data packet records will build up, so we begin to keep record every 2 packets, then every 4 packets etc. So the further the standby falls behind the less accurately we record the replication delay - though the accuracy remains proportional to the delay. To complete the patch I need to * send the keepalive messages when no WAL outstanding * receive the messages * store timestamp info for data and keepalives * progressively filter the messages if we get too many I will be working on this patch some more this week. -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
Вложения
On Sat, Dec 10, 2011 at 7:29 AM, Greg Smith <greg@2ndquadrant.com> wrote: > -It adds overhead at every commit, even for people who aren't using it. > Probably not enough to matter, but it's yet another thing going through the > often maligned as too heavy pgstat system, often. The bit about the pgstat system being too heavy is a red herring; this could equally well be stored in the PGPROC. So, the overhead is basically one additional store to shared memory per commit, and we can arrange for that store to involve a cache line that has to be touched anyway (by ProcArrayEndTransaction). I suppose you can make the argument that that still isn't free, but there aren't very many places in the code where we worry about effects this small. Operations like AcceptInvalidationMessages() or LockRelationOid() happen more often than transaction commit, and yet we were happy for years with a system where AcceptInvalidationMessages() did three spinlock acquire-and-release cycles that were unnecessary in 99% of cases. That cost was vastly greater than what we're talking about here, and it affected an operation that is more frequent than this one. > [ usability complaints ] Fair enough. > I'm normally a fan of building the simplest thing that will do something > useful, and this patch succeeds there. But the best data to collect needs > to have a timestamp that keeps moving forward in a way that correlates > reasonably well to the system WAL load. Using the transaction ID doesn't do > that. Simon did some hand waving around sending a timestamp every > checkpoint. That would allow the standby to compute its own lag, limit > overhead to something much lighter than per-transaction, and better track > write volume. There could still be a bigger than normal discontinuity after > server restart, if the server was down a while, but at least there wouldn't > ever be a point where the value was returned by the master but was NULL. > > But as Simon mentioned in passing, it will bloat the WAL streams for > everyone. But, as with this proposal, the overhead seems largely irrelevant; the question is whether it actually solves the problem. Unless I am misunderstanding, we are talking about 4 bytes of WAL per checkpoint cycle, which strikes me as even less worth worrying about than one store to shared memory per transaction commit. So, personally, I see no reason to fret about the overhead. But I'm skeptical that anything that we only update once per checkpoint cycle will help much in calculating an accurate lag value. It also strikes me that anything that is based on augmenting the walsender/walreceiver protocol leaves anyone who is using WAL shipping out in the cold. I'm not clear from the comments you or Simon have made how important you think that use case still is. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On Mon, Dec 12, 2011 at 1:45 PM, Robert Haas <robertmhaas@gmail.com> wrote: > It also strikes me that anything > that is based on augmenting the walsender/walreceiver protocol leaves > anyone who is using WAL shipping out in the cold. I'm not clear from > the comments you or Simon have made how important you think that use > case still is. archive_timeout > 0 works just fine at generating files even when quiet, or if it does not, it is a bug. So I don't understand your comments, please explain. -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
On Mon, Dec 12, 2011 at 9:24 AM, Simon Riggs <simon@2ndquadrant.com> wrote: > On Mon, Dec 12, 2011 at 1:45 PM, Robert Haas <robertmhaas@gmail.com> wrote: >> It also strikes me that anything >> that is based on augmenting the walsender/walreceiver protocol leaves >> anyone who is using WAL shipping out in the cold. I'm not clear from >> the comments you or Simon have made how important you think that use >> case still is. > > archive_timeout > 0 works just fine at generating files even when > quiet, or if it does not, it is a bug. > > So I don't understand your comments, please explain. If the standby has restore_command set but not primary_conninfo, then it will never make a direct connection to the master. So anything that's based on extending that protocol won't get used in that case. -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On Mon, Dec 12, 2011 at 2:47 PM, Robert Haas <robertmhaas@gmail.com> wrote: > On Mon, Dec 12, 2011 at 9:24 AM, Simon Riggs <simon@2ndquadrant.com> wrote: >> On Mon, Dec 12, 2011 at 1:45 PM, Robert Haas <robertmhaas@gmail.com> wrote: >>> It also strikes me that anything >>> that is based on augmenting the walsender/walreceiver protocol leaves >>> anyone who is using WAL shipping out in the cold. I'm not clear from >>> the comments you or Simon have made how important you think that use >>> case still is. >> >> archive_timeout > 0 works just fine at generating files even when >> quiet, or if it does not, it is a bug. >> >> So I don't understand your comments, please explain. > > If the standby has restore_command set but not primary_conninfo, then > it will never make a direct connection to the master. So anything > that's based on extending that protocol won't get used in that case. Got that, but now explain the reason for saying such people are "out in the cold". -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
On Mon, Dec 12, 2011 at 9:51 AM, Simon Riggs <simon@2ndquadrant.com> wrote: > On Mon, Dec 12, 2011 at 2:47 PM, Robert Haas <robertmhaas@gmail.com> wrote: >> On Mon, Dec 12, 2011 at 9:24 AM, Simon Riggs <simon@2ndquadrant.com> wrote: >>> On Mon, Dec 12, 2011 at 1:45 PM, Robert Haas <robertmhaas@gmail.com> wrote: >>>> It also strikes me that anything >>>> that is based on augmenting the walsender/walreceiver protocol leaves >>>> anyone who is using WAL shipping out in the cold. I'm not clear from >>>> the comments you or Simon have made how important you think that use >>>> case still is. >>> >>> archive_timeout > 0 works just fine at generating files even when >>> quiet, or if it does not, it is a bug. >>> >>> So I don't understand your comments, please explain. >> >> If the standby has restore_command set but not primary_conninfo, then >> it will never make a direct connection to the master. So anything >> that's based on extending that protocol won't get used in that case. > > Got that, but now explain the reason for saying such people are "out > in the cold". By that I only meant that if we add a lag-monitoring feature that relies on the streaming replication protocol, then people who are not using the streaming replication replication protocol will be unable to monitor lag (or at least, the will be unable to do it any better than they can do it today). -- Robert Haas EnterpriseDB: http://www.enterprisedb.com The Enterprise PostgreSQL Company
On 12/12/2011 08:45 AM, Robert Haas wrote: > But I'm skeptical that anything that we only update once per > checkpoint cycle will help much in > calculating an accurate lag value. I'm sure there is no upper bound on how much WAL lag you can build up between commit/abort records either; they can be far less frequent than checkpoints. All it takes is a multi-hour COPY with no other commits to completely hose lag measured by that advance, and that is not an unusual situation at all. Overnight daily ETL or reporting MV-ish roll-ups, scheduled specifically for when no one is normally at the office, are the first thing that spring to mind. Anyway, I wasn't suggesting checkpoints as anything other than a worst case behavior. We can always thump out more frequent updates to reduce lag, and in what I expect to the most common case the WAL send/receive stuff will usually do much better. I see the XID vs. WAL position UI issues as being fundamentally unsolvable, which really bothers me. I'd have preferred to run screaming away from this thread if it hadn't. > It also strikes me that anything that is based on augmenting the walsender/walreceiver protocol leaves > anyone who is using WAL shipping out in the cold. I'm not clear from > the comments you or Simon have made how important you think that use > case still is. > There's a number of reasons why we might want more timestamps streamed into the WAL; this might be one. We'd just need one to pop out one as part of the archive_timeout switch to in theory make it possible for these people to be happy. I think Simon was hoping to avoid WAL timestamps, I wouldn't bet too much on that myself. The obvious implementation problem here is that the logical place to put the timestamps is right at the end of the WAL file, just before it's closed for archiving. But that position isn't known until you've at least started processing it, which you clearly are not doing fast enough if lag exists. As far as who's still important here, two observations. Note that the pg_last_xact_insert_timestamp approach can fail to satisfy WAL shipping people who are going to a separate network, where it's impractical to connect to both servers with libpq. I have some customers who like putting a one-way WAL wall (sorry) between production and the standby server, with the log shipping being the only route between them; that's one reason why they might still be doing this instead of using streaming. There's really no good way to make these people happy and provide time lag monitoring inside the database. I was actually the last person I recall who suggested some extra monitoring mainly aimed at WAL shipping environments: http://archives.postgresql.org/pgsql-hackers/2010-01/msg01522.php Had some pg_standby changes I was also working on back then, almost two years ago. I never circled back to any of it due to having zero demand since 9.0 shipped, the requests I had been regularly getting about this all dried up. While I'm all for keeping new features working for everyone when it doesn't hold progress back, it's not unreasonable to recognize we can't support every monitoring option through all of the weird ways WAL files can move around. pg_stat_replication isn't very helpful for 9.0+ WAL shippers either, yet they still go on doing their thing. In the other direction, people who will immediately adopt the latest hotness, cascading is a whole new layer of use case concerns on top of the ones considered so far. Now you're talking two layers of connections users have to navigate though to compute master->cascaded standby lag. Cascade the WALSender timestamps instead, which seems pretty simple to do, and then people can just ask their local standby. -- Greg Smith 2ndQuadrant US greg@2ndQuadrant.com Baltimore, MD PostgreSQL Training, Services, and 24x7 Support www.2ndQuadrant.us
On Mon, Dec 12, 2011 at 12:17 PM, Simon Riggs <simon@2ndquadrant.com> wrote: > On Sat, Dec 10, 2011 at 12:29 PM, Greg Smith <greg@2ndquadrant.com> wrote: > >> "We can send regular special messages from WALSender to WALReceiver that do >> not form part of the WAL stream, so we don't bulk >> up WAL archives. (i.e. don't use "w" messages)." >> >> Here's my understanding of how this would work. > > Let me explain a little more and provide a very partial patch. > > We define a new replication protocol message 'k' which sends a > keepalive from primary to standby when there is no WAL to send. The > message does not form part of the WAL stream so does not bloat WAL > files, nor cause them to fill when unattended. > > Keepalives contain current end of WAL and a current timestamp. > > Keepalive processing is all done on the standby and there is no > overhead on a primary which does not use replication. There is a > slight overhead on primary for keepalives but this happens only when > there are no writes. On the standby we already update shared state > when we receive some data, so not much else to do there. > > When the standby has applied up to the end of WAL the replication > delay is receipt time - send time of keepalive. Patch introduces regular keepalives from WALsender to WALreceiver, using a new protocol message 'k'. These are sent at intervals of a fraction of replication_delay or 10s if not set, whenever no WAL records have been sent recently. Patch exposes info used for standby_delay calculation as used in 9.0+ In addition introduces direct calculations of replication apply delay and replication transfer latency, both in ms. -- Simon Riggs http://www.2ndQuadrant.com/ PostgreSQL Development, 24x7 Support, Training & Services
Вложения
Hi, On 2011-10-04 20:52:59 +0900, Fujii Masao wrote: > *** a/src/backend/access/transam/xact.c > --- b/src/backend/access/transam/xact.c > *************** > *** 1066,1071 **** RecordTransactionCommit(void) > --- 1066,1074 ---- > > (void) XLogInsert(RM_XACT_ID, XLOG_XACT_COMMIT_COMPACT, rdata); > } > + > + /* Save timestamp of latest transaction commit record */ > + pgstat_report_xact_end_timestamp(xactStopTimestamp); > } > Perhaps that pgstat_report() should instead be combined with the pgstat_report_xact_timestamp(0) in CommitTransaction()? Then the number of changecount increases and cacheline references would stay the same. The only thing that'd change would be a single additional assignment. Greetings, Andres Freund -- Andres Freund http://www.2ndQuadrant.com/PostgreSQL Development, 24x7 Support, Training & Services
On Mon, Aug 11, 2014 at 4:46 PM, Andres Freund <andres@2ndquadrant.com> wrote: > Hi, > > On 2011-10-04 20:52:59 +0900, Fujii Masao wrote: >> *** a/src/backend/access/transam/xact.c >> --- b/src/backend/access/transam/xact.c >> *************** >> *** 1066,1071 **** RecordTransactionCommit(void) >> --- 1066,1074 ---- >> >> (void) XLogInsert(RM_XACT_ID, XLOG_XACT_COMMIT_COMPACT, rdata); >> } >> + >> + /* Save timestamp of latest transaction commit record */ >> + pgstat_report_xact_end_timestamp(xactStopTimestamp); >> } >> > > Perhaps that pgstat_report() should instead be combined with the > pgstat_report_xact_timestamp(0) in CommitTransaction()? Then the number > of changecount increases and cacheline references would stay the > same. The only thing that'd change would be a single additional > assignment. Sounds good suggestion. While reading the patch again, I found it didn't handle the COMMIT/ABORT PREPARED case properly. According to the commit e74e090, now pg_last_xact_replay_timestamp() returns the timestamp of COMMIT/ABORT PREPARED. pg_last_xact_insert_timestamp() is mainly expected to be used to calculate the replication delay, so it also needs to return that timestam. But the patch didn't change 2PC code at all. We need to add pgstat_report_xact_end_timestamp() into FinishPreparedTransaction(), RecordTransactionCommitPrepared() or RecordTransactionAbortPrepared(). Regards, -- Fujii Masao
On Mon, Aug 11, 2014 at 8:27 PM, Fujii Masao <masao.fujii@gmail.com> wrote: > On Mon, Aug 11, 2014 at 4:46 PM, Andres Freund <andres@2ndquadrant.com> wrote: >> Hi, >> >> On 2011-10-04 20:52:59 +0900, Fujii Masao wrote: >>> *** a/src/backend/access/transam/xact.c >>> --- b/src/backend/access/transam/xact.c >>> *************** >>> *** 1066,1071 **** RecordTransactionCommit(void) >>> --- 1066,1074 ---- >>> >>> (void) XLogInsert(RM_XACT_ID, XLOG_XACT_COMMIT_COMPACT, rdata); >>> } >>> + >>> + /* Save timestamp of latest transaction commit record */ >>> + pgstat_report_xact_end_timestamp(xactStopTimestamp); >>> } >>> >> >> Perhaps that pgstat_report() should instead be combined with the >> pgstat_report_xact_timestamp(0) in CommitTransaction()? Then the number >> of changecount increases and cacheline references would stay the >> same. The only thing that'd change would be a single additional >> assignment. > > Sounds good suggestion. I attached the updated version of the patch. I changed pgstat_report_xx functions like Andres suggested. > While reading the patch again, I found it didn't handle the COMMIT/ABORT > PREPARED case properly. According to the commit e74e090, now > pg_last_xact_replay_timestamp() returns the timestamp of COMMIT/ABORT PREPARED. > pg_last_xact_insert_timestamp() is mainly expected to be used to calculate > the replication delay, so it also needs to return that timestam. But the patch > didn't change 2PC code at all. We need to add pgstat_report_xact_end_timestamp() > into FinishPreparedTransaction(), RecordTransactionCommitPrepared() or > RecordTransactionAbortPrepared(). Done. Regards, -- Fujii Masao
Вложения
On Wed, Aug 13, 2014 at 12:41:24PM +0900, Fujii Masao wrote: > On Mon, Aug 11, 2014 at 8:27 PM, Fujii Masao <masao.fujii@gmail.com> wrote: > > On Mon, Aug 11, 2014 at 4:46 PM, Andres Freund <andres@2ndquadrant.com> wrote: > >> Hi, > >> > >> On 2011-10-04 20:52:59 +0900, Fujii Masao wrote: > >>> *** a/src/backend/access/transam/xact.c > >>> --- b/src/backend/access/transam/xact.c > >>> *************** > >>> *** 1066,1071 **** RecordTransactionCommit(void) > >>> --- 1066,1074 ---- > >>> > >>> (void) XLogInsert(RM_XACT_ID, XLOG_XACT_COMMIT_COMPACT, rdata); > >>> } > >>> + > >>> + /* Save timestamp of latest transaction commit record */ > >>> + pgstat_report_xact_end_timestamp(xactStopTimestamp); > >>> } > >>> > >> > >> Perhaps that pgstat_report() should instead be combined with the > >> pgstat_report_xact_timestamp(0) in CommitTransaction()? Then the number > >> of changecount increases and cacheline references would stay the > >> same. The only thing that'd change would be a single additional > >> assignment. > > > > Sounds good suggestion. > > I attached the updated version of the patch. I changed pgstat_report_xx > functions like Andres suggested. > > > While reading the patch again, I found it didn't handle the COMMIT/ABORT > > PREPARED case properly. According to the commit e74e090, now > > pg_last_xact_replay_timestamp() returns the timestamp of COMMIT/ABORT PREPARED. > > pg_last_xact_insert_timestamp() is mainly expected to be used to calculate > > the replication delay, so it also needs to return that timestam. But the patch > > didn't change 2PC code at all. We need to add pgstat_report_xact_end_timestamp() > > into FinishPreparedTransaction(), RecordTransactionCommitPrepared() or > > RecordTransactionAbortPrepared(). > > Done. Is this going to be applied? -- Bruce Momjian <bruce@momjian.us> http://momjian.us EnterpriseDB http://enterprisedb.com + Everyone has their own god. +